User's Manual

*Low power return:

Intelligent Return: When the power of the aircraft is less than 20%, the aircraft will automatically

start the return mode. At this point, the remote control will emit “di” sounds, the

battery power icon flashes on the App, and the Return icon lights up when the

drone is flying back.

Low-power Protection: The drone system will judge if the drone needs auto return according to

the distance and the battery power situation. When the drone is flying back,

its 4 LED lights continue to flash slowly until it lands on the ground.

HEADLESS MODE

Note:

Because the operator's operating position is very important for the realization of "headless mode"

when the frequency is aligned. Therefore, after entering the "headless mode", please do not change

the operator's operation direction.

*Lost-of-Signal Return:

When the drone lost connection with the remote control, it will auto fly back to 30m away from the

controller. And the drone can reconnect the remote control when flying, then you need to operate

the throttle stick to let it land. And you can push the left and right sticks inwards 45° to lock the

motors.

Note: The aircraft does not have an obstacle avoidance function. If the drone hits a

building or some obstacle on the way auto-return, it will fall down.

App Control: Click the "HOME" icon on the APP to start One-button return. And click the

icon to cancel auto-return.

Don't change the orientation

Keep the same orientation of operator facing

when in pairing as the pictures.