Security Camera Outdoor Quick Installation Guide Thank you for choosing our security camera outdoor. Please read the quick installation guide carefully before using and keep it in good conditions.
I.
II. Appearance Brief 1. Wifi Antenna 2. Camera Lens 3. Infrared LEDs (for night vision) 4. Floodlight LEDs (for color night vision) 5. Microphone 6. Night Detection Sensor 7. Micro SD Card and Reset Button Inside 8. Reset Button 9. Power Port 8 9 10 10.
III. Product Specifications Security Camera for Outdoor Sensor Image Resolution Min illuminance Infrared Mode Infrared White Light Mode Control Mode Infrared & White Light mode Resolution Video Frame Rate Input Audio Output Speaker Rotation Angle Motion Detection AI Humanoid Detection Function Alarm Sound Alarm Message Storage Record Standard Local Storage Record Mode View Video Wired Network Interface Wifi Others Certificates Power Connector Working Conditions Working Power Consumption CE, RoHS, FCC 1/2.
IV. Product Instructions 1. APP Download and Installation 1). For Android devices, search in Google Play and download “Tuya smart”; For iOS devices, download “Tuya smart” in APP store. 2). Scan the “Tuya smart” APP QR code below, download and install it according to the APP hints Android iOS Notes: To ensure that the full functionality of the “Yuya smart” APP works properly, allow the “Tuya smart” APP to gain access to your mobile devices.
2. Accounts Registration Open the Tuya smart APP, click “Agree” of privacy policy and then register an account with a mailbox or mobile number, after registering successfully, log in the Tuya smart APP.
Notes: 1) Please tick “Agree” and “Service Agreement and Privacy Policy”; 2) If the verification code is sent out over time due to network problems, please try again later; 3) If register with mailbox, please check the verification code in spam mailbox if you didn't receive.
3.1 QR Code Net-paring (Recommendation) Step 1: Powered on the camera. After powered, the camera will emit a beep. If not, please press and hold the reset button for 3 seconds to reset the device. Step 2: Connect the mobile phone to 2.4G WIFI and open the APP "Tuya Smart", then follow the steps as follow.
Notes: 1) The passwords do not support special characters such as @,#,%,& 2) Place the camera next to the router before configuring 3) QR Code Net-paring and Smart Configuration only support 2.
3.2 QR Code Net-paring (Recommendation) Please place the camera and QR code of the mobile phone at a distance of 5.9-7.8 inch . Within this range, the mobile phone can be moved slightly left and right, up and down to ensure that the camera can scan the QR code on the phone. Heard the beep, click "I Heard the Prompt".
V. Operation Guide 1. Interface Introduction When accessing to the current interface, you can slide or zoom the video interface, switch to play sound, capture High-Definition (HD) pictures, view the real-time video with full screen, snapshot real-time pictures and launch an intercom, save pictures and record video to local album, select the HD mode of the camera. 1. Camera Name 2. Parameters Setting 3. Time Watermark 4. High Definition Setting 5. Signal 6. Minimize 7. Camera Sound Switch 8.
2.1 Video Cloud Storage Support record the latest 30 days’ event recordings. 1 month free trial. 4 plans can be chosen as your needs. 2.2 Sites Max save 6 site points. Just click on the image of the favo r i te , t h e c a m e ra w i l l automatically turn to that location. Support timing to any site, the camera will automatically turn to the site when time is up. 2.3 Patrol Turn on mo tio n tra c king , the camera will follow the movement of the object when it detects the object is moving.
3. Parameters Settings 3.1 Playback Accessing to the real-time v i d e o , e n te r t h e p l ay b a c k interface. Then you can capture pictures, watch and record video during the time you need. 3.2 Detection Alarm Messages You can choose the exact date to check the alarm message.
3.3 Private Mode Open this mode, the camera will be in sleep mode which means that the camera will not record, click “Turn on Camera”, then it records again. 3.4 Multi-View Support to watch live videos of up to 4 cameras at the same time.
4. Settings 4.1-1 Basic Function Settings Private Mode: Turn on this mode, then the basic Function Settings and Nightvision Mode will be hidden Basic Function Setting: Flip Screen, Time Watermark and Talk Mode Flip Screen: Turn on " Flip Screen", then you can see the picture of live video is 180 degree rotation. Time Watermark: Turn on “Time Watermark”, the time will be displayed in the upper right corner of the live video.
4.1-2 Basic Function Settings Nightvision Mode: Auto Mode, IR Mode and Color Mode Auto Mode: When the camera detect motion in the dark, the lights on both sides will light up. When no object is detected to move for 30-40s, the lights on both sides will turn off automatically. IR Mode: Whether it is day or night, the video image is always black and white color. Color Mode: Whether it is day or night, the video image is always color.
4.2 Detection Alarm Settings Before using movement detection alert, please plug a TF card into the camera or have successfully purchased cloud storage service. Motion Detection: Turn on motion detection, if the camera detects object movement: and the app will send a notification; Alarm Sensitivity Level: Motion detection has low, medium and high level; Motion Tracking: Please refer to page 12; Alarm Timer Settings: Customize the set time to turn motion detection on or off.
4.3 Storage Settings The camera has microSD card slots and local backup, supports a TF card up to 128GB. You can choose recording mode and set the schedule to open or close the switch. Notes: 1. If the video saved by SD card, please turn on the Local Recording in the memory card settings. 2. The SD card must be formatted on the computer before inserting the SD card. 3. Unplug the power cable the power before inserting the SD card, otherwise it will burn the SD card. 4.
4.4 Sharing Setting Note: (Before sharing) 1. The shared person should download Tuya smart APP firstly; 2. The shared account should choose the country on the APP as same as the master account when register the APP.
VI. Help Center&More Service In the help center, you can find the solution of the problem. Click all, you can find more solution of the issue. If all the above solutions can't solve your problem, you also can submit the question by clicking the “Unresolved? Send Feedback”. Then you will get the answer in 24 hours. But we recommend you to contact the seller directly better.
VII. Installation Instructions Step 1: Unscrew the two screws of the camera bracket base Step 2: Remove the bracket clip from the camera bracket base Step 3: Fix the bracket clip to the wall, tighten three screws. Then push the camera onto the bracket groove Step 4: Tighten the two screws of the camera with bracket on the wall.
VIII. Assemble Antenna & Power Up 1. Adjust the antenna to have the best receiving of Wifi signals. as shown in Figure1. 2. Connect the camera to the power adapter with cable, then plug the power adapter to a power outlet, as shown in Figure 2. Make sure the camera is within the range if your Wifi network that you want to connect. Make sure the signal is srtong when you pair the camera to the wifi network.
IX. Troubleshooting 1. ● ● ● ● ● ● APP can't be registered successfully Please check if the network of the mobile phone is normal; Please tick the software service agreement and privacy policy; Please check if the verification code is in the spam mail; Please use WIFI to register if mobile network cannot be registered.
After the network is normal, reset the camera and reconnect. 2.2 Unable to connect to wired: ● Please enable the DHCP of the router; ● Please make sure the camera is not in the blacklist in MAC settings of the router; ● Connect the network cable to your computer firstly, then check the computer and obtain the IP address.
● ● Put the phone as close as possible to the camera and router when it is connecting; Please turn off the 5GHz wifi. 4. No pop-up message for motion detection alarm ● ● ● ● Open permission setting in the system settings of mobile device to allow APP to receive message push notification; After some Android phones exits the background, it is not possible to receive the alarm push information; Turn off motion detection in APP; SMS and email reminders are not supported at this time. 5.
Please refer to the page 18 8. Watch videos with the same camera on different devices ● ● The master account can share the video to other account without limit quantity, but the shared accounts only have the rights to watch, snapshot and record video; The main account name and password also could be logged in on other devices to view the video and use any function. 9. The scenarios for the reset key ● ● ● ● ● Reset wifi information.
X. Legal Declaration Disclaimer The products (including hardware, software, firmware, etc.) described in this manual (including its hardware, software, firmware, etc.) should be provided in accordance with the "status quo". As for the possibility of defects, errors, or failures, We do not provide any form of express or implied warranty, including but not limited to the merchantability or the assurance that the person is applicable to a particular purpose.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
