深圳市布宜诺科技有限公司 Shenzhen Bueno Technology co.,LTD Air Purifier H211S 规格:140×180mm(34p) 说明书 修改 修改 C0 M0 Y0 K20 C0 M0 Y0 K70 用料:105g双铜纸 C10 M0 Y0 K100 装订工艺: 骑马订 PANTONE 3115C 印刷工艺: 四色印刷 2022.2.28修改认证+内容 2022.7.
Smart True HEPA Air Purifier User Manual / Model H211S support@homvana.
Contents Package Contents 01 Specifications 01 Safety Information 02 Getting to Know Your Air Purifier 03 Product Overview 03 Controls 04 About the Filtration System 07 Getting to Use Your Air Purifier 08 Set up 08 Use Your Air Purifier 09 Cleaning & Maintenance 09 Troubleshooting 11 Warranty 14
Package Contents Safety Information READ AND SAVE THESE SAFETY WARNINGS & INSTRUCTIONS User Manual IMPORTANT: Please read, understand and comply with all of the instructions in this manual, or it may result in serious injury and/or damage to the product. If the humidifier is damaged or if it is not functioning properly, please contact us: support@homvana.shop QUICK START GUIDE DO NOT try to repair it yourself. ONLY use this air purifier as described in this manual.
Getting to Know Your Air Purifier Product Overview Controls Power Button Tap to turn on/off the air purifier. The fan will start on level I. Memory Function The air purifier will remember previous fan speed setting when turned off and left plugged in or when unplugged during operation. The air purifier will not remember Timer, Display Off or Sleep Mode setting.
Air Quality Indicator Color Red Orange Blue Green Tap to turn on/off Sleep Mode. Sleep Mode operates quietly by using the lowest possible fan speed. After the Sleep Mode starts, the Sleep Mode Button and the Power Button will light up at half brightness, while the rest of lights or indicators on the panel will be off, including the air quality indicator. Display/Filter Button Timer Button Tap repeatedly to set the timer among 2H, 4H and 8H or turn the timer off.
About the Filtration System Getting to Use Your Air Purifier Set up 38cm / 15in 07 08
Use Your Air Purifier Clean the Air Sensor Lens Cleaning & Maintenance Replace the Main Filter When the Display/Filter Button lights up red or the true HEPA 4-stage filter is hoped to changed before the Display/Filter Button lit up: 09 10
Problem Air purifier makes an unusual noise when the fan is on. Depending on how often you use the air purifier, the Display/Filter Button light should turn on after about 6-8 months of use, reminding you to change the filter. To maintain the performance of your air purifier, only use official filters. To buy replacement filters, visit Homvana’s online store on Amazon. Tap to increase the fan speed. Airflow is significantly reduced.
Problem The air purifier is producing an unpleasant odor. Air quality indicator always stays the same color. Possible Solutions Clean the filter or replace it if necessary (see Cleaning & Maintenance, page 9). Make sure that the air purifier is in a room where the relative humidity is less than 85% RH. Higher humidity levels may cause mildew to grow on the filter. When the purifier is turned on, the air quality indicator will be green by default. The air purifier may take up to 1 minute to detect air quality.
Homvana App Setup Note:Due to ongoing updates and improvements, the Homvana App may be slightly different from that shown in the manual. In case of any differences, follow the in-app instructions and FAQs. 1. Scan the QR code below, or search “Homvana” in the Apple App Store or Google Play Store to download the Homvana App. Note: Should be completed within 3 minutes after the humidifier is powered on. If not, please unplug the humidifier for a while and retry. 2.
Monitor Humidity Levels Problem Check the current humidity level and temperature in the humidifier’s environment. Possible Solutions Make sure the humidifier is plugged in. The humidifier may appear to be offline if it is unplugged, or if the outlet does not have power. Refresh the Homvana menu by swiping it down on the screen. Make sure your router is connected to the internet and your phone’s network connection is working.
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.