Instruction Manual

Temperature measurement instructions
1. After the thermal imager is turned on, it needs to be preheated for 10
minutes；
2. When measuring, please make sure the distance is 30-50cm and the
measuring time is more than two seconds；
2. It is recommended to be used in indoor scene, and the ambient
temperature is 0 ~ 40 ℃；
3. Direct sunlight is strictly prohibited, which will cause irreversible
damage to the lens；
4. During temperature measurement, in order to ensure the accuracy of
data, avoid the lens facing the heat source such as air conditioner,
sunlight, glass reflection and wind blowing, and avoid the influence of
heat source on the measured human body。