User's Manual

a b c
a
bc
Left Joystick
Right Joystick
6
E01003 USER MANUAL
the remote controller ready before ight
4. Switch Between Mode 1 and Mode 2
(1) Switch to Mode 2
Toggle the left joystick
a
to the lowest position and press the "One Key Takeoff/ Landing" button
b
at the same time. Then turn
on the remote controller
c
. Release the joystick
a
and the button
b
to enter Mode 2.
(2) Switch to Mode 1
Toggle the right joystick
a
to the lowest position and press the "Photo/ Video" button
b
at the same time. Then turn on the
remote controller
c
. Release the joystick
a
and the button
b
to enter Mode 1.
5. Control via the Remote Controller
1) Power on the
Remote Controller
.
Long press the power switch " " for 2 seconds to switch on the Remote Controller.
2) Power on the aircraft.
Long press the power switch for 2 seconds to switch on the aircraft.
Power on the aircraft and put it on a flat level surface for 30 seconds for self-checking. When the aircraft's indicator light turns from
blinking or solid blue to blinking or solid green, the aircraft has successfully paired with the remote controller.
3) Take off
○ Method 1: Manually control it to take off
When the aircraft's light turns from blue to green (as shown in the
right picture), toggle the left and right joysticks outward for at least
3 seconds (as shown in the picture) as to get the propellers started
to rotate.
Slowly toggle the throttle joystick upward to control the aircraft to
take off quickly, and then toggle again to make it ascend slowly.
○ Method 2: Press "
" One Key Takeoff/ Landing to
control it to take off
Long press the "
" One Key Takeoff/ Landing button for 2 to 3 seconds. When the remote controller beeps continuously, the
aircraft will automatically take off and ascend to the altitude of 1.2 meters and hover.