User Manual

14

Insert a paperclip into the reset hole in the back of the UC or go to SETUP>RESTORE DEFAULT >OK.
Memory will be retained but you should always have a backup copy!
Connecting to a computer
Using the provided micro USB cord, insert the small end into the top of the UC. Insert the large end into a USB
port on your computer. Yep, that’s all. The drive (MAC) or auto play window (windows) will pop up on the
screen.
Switching between computer and device usage
There is no need to disconnect the USB cord each time you want to work directly on the UC. >>> [M] to
“disconnect”. >>> [F] to reconnect to the computer.