Wireless Router Products WR135G Wireless Router User Manual Version：V1.0 Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108) Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055) Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 Website: www.szceres.
Content 1 Note ................................................................................................................................................ 2 1.1 Installation Precautions ....................................................................................................... 2 1.2 Precautions for Use ............................................................................................................. 2 2 Brief .......................................................................
1 Note 1.1 Installation Precautions Do not place the equipment near flammable or conductive items, high temperatures (such as direct sunlight) or in wet conditions, or on a PC chassis, and check that the surrounding appliances are stable. Check the cable for aging. Check and verify that the AC or DC input voltage is within the permissible range of the device and that the polarity of the DC is correct.
Unplug the power supply before cleaning the equipment. Use a soft dry cloth to clean the equipment to avoid the use of liquids or sprays. Do not connect this product to any electronic product unless it is instructed by our customer engineer or your broadband supplier, as any incorrect connection may cause power or fire hazard.
2 Brief The WR135G is a wireless router, support one wan port,four 1000M lan ports. 2.4G WI-FI rate can reach 300Mpbs, 5G WI-FI rate can reach 867 Mpbs ,allows you to quickly set up a 300 Mbps wireless network or 867 Mbps wireless network, and lets your computers can access to Internet.The wireless router is compatible with IEEE802.
2.3 Device Interface Definition LAN port: (Yellow RJ-45 port (1-4)) connect computers and other terminal devices. WAN port: (Blue RJ-45 port)connect the operators network . 2.4 LED Description Indicator 1 PWR 2 WLAN 2.4G 3 WLAN 5G Description Power status On: The WIFI router is power on; Off: The WIFI router is Power off; On：2.4G Wi-Fi function Opens WLAN Status Off：2.4GWi-Fi function Close On：5G Wi-Fi function Opens Off：5GWi-Fi function Close 2.
3 WIFI Router Local Web Login Management 3.1 Physical Connection of WIFI Router And PC or Phone a) Connect wireless devices such as mobile phones to the wireless network of the router. The default wireless network name can be viewed on the sticker on the bottom of the router.
3.2 PC and Phone Access the WEB of WIFI Router Make sure computers and WIFI router connected in # 3.1, open PC Web browser (IE, firefox, Google), copy and paste the WIFI router to access the URL：http://192.168.10.1, then pop-up WIFI router prompt login page as follows: Input WIFI router PassWord：admin，Click “LogIn” button. Then we can see setup guide as follows： .
4 View WIFI Router Status 4.1 View WIFI Router System Status 1.
4.2 View WIFI Router Wireless Information 1. Input WIFI router web main interface,then click Wireless -> 2G WIFI name and password or 5G WIFI name and password,then we can view WIFI mode,Channel and Bandwidth and etc： 1# Click “2G WIFI name and password “ ,View 2G WIFI information.
2# Click “5G WIFI name and password “ ,View 5G WIFI information. 5 WIFI Router Internet WAN Configuration For the WIFI router the internet access method is use routing mode,internet wan configuration is important things.WIFI router support 3 method internet access ways:PPPoE、 Dynamic IP、Static IP . 5.
After finshed all of the configuration,click „Enable‟ button to finish “PPPOE”setting. 5.2 Set WIFI Router DHCP Access Internet Method Login WIFI router web main interface,then click “Internet setup”,then Select “Dynamic IP” in mode. After finshed all of the configuration,click „Enable‟ button to finish “DHCP”setting. 5.
【DNS1】Set main DNS for internet wan connection After finshed all of the configuration,click „Enable‟ button to finish “Static IP”setting. 5.4 View WIFI Router Internet WAN Connection Status On WIFI router web main interface select Router ->System state ,in this interface,we can check the WIFI router whether get ip,if wan connect is successful and ip address information .
6 WIFI Router LAN Port Configuration 6.1 LAN IP Address And DHCP Server Configuration 1. In WIFI router web main interface select Router-> LAN Settings,then config parameter as follows: 【IP】Set local management IP address of WIFI router. The default IP address is 192.168.10.1 【mask】Set the mask of local management IP address of WIFI router 【DHCP】Click the button to enable or disable Router DHCP Server function. 【Start IP / End IP】Configure the IP address interval that allocated to the terminal.
segment as the management IP address of the Router. 【DNS1】Set main DNS for internet wan connection 【DNS2】Set second DNS for internet wan connection After finshed all of the configuration,click „confirm‟ button to finish “LAN IP”setting.
7 WLAN Configuration 7.1 Wireless 2.4G wifi configuration 1# Login to WIFI router web main interface then click Wireless->2G WIFI name and password ,then config wireless as follows parameter: Click the button next to switch to control the on and off of WIFI.
After setting wireless configuration, click „Confirm‟ button to finish setting. 7.2 Wireless 5Gwifi configuration Login to WIFI router web main interface then click Wireless->5G WIFI name and password ,then config wireless as follows parameter: Click the button next to switch to control the on and off of WIFI.
After setting wireless configuration, click „Confirm‟ button to finish setting. 7.3 Config Parental Control Strategy 1.
Click “Confirm” button to make configuration effect. 8 WIFI Router Management 8.
8.2 Backup And Restore Configuration Files Login WIFI router web main interface,click Router-> Backup and development,then we can config WIFI router as follows: 1.Click “ backup ”button to save the system configuration locally. 2.Choose WIFI Router backup File to restore 3.Click“Configuration” button to make configuration effect.
8.3 Firmware Upgrade Login WIFI router web main interface,click Router-> Software upgrade ,then click “Choose file” button,Choose the version you want to upgrade,then click “Confirm” button to ungrade firemware： Upgrade WIFI router need about four minuters,then WIFI router will auto reboot,don‟t need reboot manually.
8.4 Reboot And Restore Default Settings WIFI Router Login WIFI router web main interface,click Router -> Restart and reset 【Factory reset 】Click “Reset” button to reset WIFI router 【Reboot router】Click“reboot” button to reboot WIFI router.
8.5 Config WIFI Router Login Password Login WIFI router web main interface,click Router -> Admin password login password： Company Address: Flat 6, Bldg 4,South 2 of Honghualing Industrial Zone,Liuxian Road, Xili Town, Shenzhen, Guangdong, China(518055) Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055) Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506 22 Website:www.szceres.
Finish config,click “confirm” button to make config effect. Note :After change the WIFI router login password,we need input new password login WIFI router web interface again. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Thanks for using products of Shenzhen Ceres Technology Co., Ltd. Contact Information: Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108) st Factory Address: 1 floor, Building B, Wentao Industrial Park, Yingrenshi Community, Shiyan Avenue, Baoan District, Shenzhen, China Telephone: 0755-26014509/26014710/26014711 Fax: 0755-26014506 Email: marketing@cerestec.com Website: www.szceres.
