User's Guide

Quick Start
1. Press and hold the Power/ can button
to turn on your radio.
2. Press the Menu, Up or Down
button to select a channel.
S
Press the
Both radios must be tuned to the same
channel/privacy code to communicate.
3. Press and hold the PTT button while
speaking into the microphone.
4. When finished talking, release the PTT
button and listen for a response.
Turning on Your Radio
Press and hold the Power/Scan button until you hear
a series of audible tones indicating the radio is on.
Your radio is now in Standby mode,ready to receive
transmissions. The radio is always in Standby mode
except when the Talk, Call or Menu/Lock buttons
are pressed.
Battery Low
Battery Low
When battery power is low, the final bar in the Battery
Low icon will blink and an audible tone will sound twice
before the radio shuts off. Your batteries should be
replaced or recharged, if using rechargeable batteries.
The radio will display flashing battery icon
while charging.
Auto Battery Save
If there are no transmissions within 10 seconds,the radio will
automatically switch to Battery Save mode and the Power Saver
icon will flash in the display. This will not affect the radio’s ability to
receive incoming transmissions.