User's Guide

1. Press and hold the PTT button.
2. With the microphone about two inches (2.5-5 cm) from your mouth,
speak in a normal voice.
3. Release the PTT button when you are finished talking and listen
for a response.You cannot receive incoming calls while pressing
the PTT button.Both radios must be tuned to the same
channel/privacy code to communicate.
Communicating with Another Person
With the radio on, select any of the 22 channels by
pressing enu and the Up or Down button.
Both radios must be tuned to the same channel to
communicate.
M
To Select a Channel
Release the PTT button to receive incoming transmissions. Your
radio is always in Standby mode while the Talk or Call buttons are
not pressed.
Listening for a Response
To Adjust Volume
The radio is in Standby mode.
Press the Up button to increase the speaker volume.
Press the Down button to decrease the speaker
volume.
The speaker volume level is indicated by the numbers
1-8 displayed.
Press and release the Call button.
The other person will hear a two second call tone.
This tone is used only to establish voice
communications.See page 7 on how to select
between ten call tone settings.
Call Button