User's Guide

Auto Battery Save
If there are no transmissions within 3 seconds,the radio will
automatically switch to Battery Save mode and the Power Saver
icon will displayed. This will not affect the radio’s ability to
receive incoming transmissions.
1. Press and hold the PTT button.
2. With the microphone about two inches (2.5-5 cm)
from your mouth, speak in a normal voice.
3. Release the button when you are finished
talking and listen for a response.
You cannot receive incoming calls while pressing
the button.
Both radios must be tuned to the same
channel/privacy code to communicate.
PTT
PTT
Communicating with Another Person
With the radio on, select any of the 22 channels by
pressing M enu and the Up or Down button.
Both radios must be tuned to the same channel to
communicate.
To Select a Channel
Release the button to receive incoming
transmissions. Your radio is always in Standby
mode while the or Call buttons are not pressed.
PTT
PTT
Listening for a Response
Press the Up or at the standby mode.
A double beep sound is used to indicate
the minimum and maximum volume levels
(1 through 8).
Down button
To Adjust Volume
Channel Number
Listening
Volume Level