User's Guide

Quick Start
1. Press and hold the Menu/Power button
to turn on your radio.
2. Press the Menu, Press the Up or Down
button to select a channel.
Both radios must be tuned to the same
channel/privacy code to communicate.
3. Press and hold the PTT button while
speaking into the microphone.
4. When finished talking, release the PTT
button and listen for a response.
Turning on Your Radio
Press and hold the Menu/Power button until you
hear a series of audible tones indicating the radio is
on.Your radio is now in Standby mode,ready to receive
transmissions. The radio is always in Standby mode
except when the PTT, Call or Menu/Power buttons
are pressed.
Battery Low
When battery power is low, the final bar in the Battery
Low icon will blink and an audible tone will sound twice
before the radio shuts off. Your batteries should be
replaced or recharged, if using rechargeable batteries.
The radio will display flashing battery icon
while charging.
Battery Low
For charging radios (A /Batteries:Just for batteries and
adpater packaging option)
1.To charge a single radio, simply insert the connector directly
into the charge jack located on the bottom of the radio.
The radio will display flashing battery icon while charging.
Recommends your radio be turned off while being charged.
dpater