Installation Instructions

Table Of Contents

user manul

Product:Wireless Remote Control

Model:CDT-CB4A

1.On/off: Turn on/ off the projector.

2.Colour: select colours.

3.Flash/Steady: Select between Flash/ steady function.

4.Timer:Press the timer button, the image will flash for 3 times to indicate timer

function on. To disable Timer, press the button for image will flash once to indicate

exit from timer function.

PAGE 1
user manul Product:Wireless Remote Control Model:CDT-CB4A 1.On/off: Turn on/ off the projector. 2.Colour: select colours. 3.Flash/Steady: Select between Flash/ steady function. 4.Timer:Press the timer button, the image will flash for 3 times to indicate timer function on. To disable Timer, press the button for image will flash once to indicate exit from timer function.
PAGE 2
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.