Operation Instruction

test modes. Connected to the computer through the serial port
of the host product, the channel and power controlling
software provided by the applicant was used to control the
operating channel as well as the output power level. The RF
output power selection is for the setting of RF output power
expected by the application and is going to be fixed on the
firmware of the end product.
9) Additional testing, Part 15 Subpart B disclaimer
The modular transmitter is only FCC authorized for the
specific rule parts (FCC Part 15.249&15.247&15.407) list on the
grant, and that the host product manufacturer is responsible
for compliance to any other FCC rules that apply to the host
not covered by the modular transmitter grant of certification.
The final host product still requires Part 15 Subpart B
compliance testing with the modular transmitter installed
when contains digital circuity.
10) The device is going to be operated in 5150~5250MHz
frequency range. It is restricted indoor environment only.
11) The device working temperature 0℃ to +60℃
12) The device working voltage 3.3V±10%