User's Manual

ShenZhen ChuangYunDa Electronic Technology Co.,LTD
Product Name: Bluetooth speaker
Model No.: KH-A1, KH-A2, KH-A3, KH-A5, KH-A7, KH-A8, KH-19, KH-J06,
KH-J07，KH-J08, KH-J09, KH-J10, KH-J11, KH-J12, KH-J13,
KH-J15, KH-J16, KH-J17, KH-J18, KH-J19
User Manual
Thank you for purchasing our products. You must read the product manual carefully
before use. We are not responsible for any personal injury or product damage caused
by improper use.
Bluetooth mode
Bluetooth version: Bluetooth2.1, supports IOS, android and other devices
2. Toggle the switch to the NO position, the audio will be started, and the machine
will automatically enter bluetooth mode with bluetooth prompt sound.
3. The mobile phone enters bluetooth and searches for the bluetooth pairing name.
Click "connect".
TF card model
1. Insert TF card after starting up, and automatically enter the playback mode of TF
card, and the TF icon will be displayed when playing
2. After unplugging TF, the stereo will automatically enter bluetooth mode
U disk model
1. Insert the USB disk after starting up, and automatically enter the USB disk playing
mode, and the USB icon will be displayed when playing
2. After pulling out the U disk, the sound system will automatically enter bluetooth
mode
AUX mode
1. After starting up, insert audio cable into AUX mode and display Line
3. After unplugging the audio cable, the audio will automatically enter bluetooth
mode
FM radio mode
1. After starting up, insert the equipped charging cable into DC5V port to act as an
external antenna; Press the M key switch to the FM mode, long press ▶ II into
automatic searching mode, search after the completion of the I the ◀ ◀ / ▶ ▶ I
switch the radio.
charging
1. Plug the USB cable into the DC5V charging port and the other end into the 5V1A
charger to charge the built-in battery of the audio system
The clock mode
1, the boot after press the M key switch to the clock mode, long press ▶ II, enter the
time setting;
2, according to the I ◀ ◀ / ▶ ▶ I key adjustment need to set the time, short press ▶
II switch/points set, the time set to end, long press ▶ II, back to the master clock