User's Manual
Table Of Contents
- Summary
- Applications
- Hardware Description
- Specifications
- Start to use
- Function details
- Changing password
- Authorization
- Single tracking
- Continuous interval tracking
- Smart angle updating
- GPS drift suppression
- Exact street address
- Location based service (LBS) / Cell-ID tracking
- Auto answer
- Forwarding incoming SMS messages
- SIM Card Balance Enquiry
- ACC ON/OFF Alert
- Remote immobilizing
- Fuel sensor calibrating
- Configure times of alarm SMS
- Alarms
- Remote control function (For B model)
- Arming
- Silent Arming
- Disarming
- Alarm function in arming state
- Sleep
- Check Status
- Check IMEI
- Local time setting
- Reset Hardware
- GPRS configuration for live real-time tracking
- Activate Fuel value in GPRS data
- Configure SMS management center number
- Configure heartbeat package interval
- Initialization
- Cautions
- Troubleshooting
12
devices on the map, click the icon of the device to see the details including
latitude & longtitude, speed, altitude, time, ACC status, door status, and
alarm status, etc. and you can click “Navigate” to navigate you to that car.
2. Select the device: Click “≡” at the upper left corner to select a device, Then
its position, Geo-fence and trace (need to configure the “continuously
track” settings of the “Control” page) will be showed on the map.
5.6.5 Control
After selected the device, then click “Control” to enter control page to use function of
single track, continuously track, Arm / Disarm and Geo-fence, etc.
Select the device