User's Manual
Table Of Contents
- Summary
- Applications
- Hardware Description
- Specifications
- Start to use
- Function details
- Changing password
- Authorization
- Single tracking
- Continuous interval tracking
- Smart angle updating
- GPS drift suppression
- Exact street address
- Location based service (LBS) / Cell-ID tracking
- Auto answer
- Forwarding incoming SMS messages
- SIM Card Balance Enquiry
- ACC ON/OFF Alert
- Remote immobilizing
- Fuel sensor calibrating
- Configure times of alarm SMS
- Alarms
- Remote control function (For B model)
- Arming
- Silent Arming
- Disarming
- Alarm function in arming state
- Sleep
- Check Status
- Check IMEI
- Local time setting
- Reset Hardware
- GPRS configuration for live real-time tracking
- Activate Fuel value in GPRS data
- Configure SMS management center number
- Configure heartbeat package interval
- Initialization
- Cautions
- Troubleshooting
22
6.9 Auto answer
Track is the default mode for position.
SMS command to switch to auto answer mode: autoans +password
Tracker response: autoans ok!
Example: autoans123456
Note: If there aren’t any authorized numbers set-up, it will auto answer for all the
incoming calls, if there are authorized numbers set-up, it will auto answer the
incoming calls from authorized numbers and reject all other phone numbers.
SMS command to switch back to track mode: tracker+password
Tracker response: tracker ok
Example: tracker123456
6.10 Forwarding incoming SMS messages
SMS command: forward+password+space+third party phone number
Tracker response: forward ok
Example: forward123456 10086
The carrier’s number which used to sending notification messages is
recommended to set up, tracker will forward the notification message to
authorized numbers when carrier send message to remind you to top up your SIM
card.
SMS command to cancel: noforward+password
Tracker response: no forward ok
Example: nofoward123456
6.11 SIM Card Balance Enquiry
SMS command: balance+password+space+phone number+space+code
Tracker response: It will forward the code to the specified phone number and
return the content from that number.
Example: balance123456 10086 ye
This function assumes that your GSM network provider has the option where you
can check your SIM card’s balance by sending a SMS message to a specified