User's Manual

24
20KM/H.
SMS command: noquickstop+password
Tracker response: noquickstop OK
Example: noquickstop123456
Remote immobilizing
SMS command: stop+password
Tracker response: Stop engine succeed
Example: stop123456
Once the immobilize function has been executed, it will remain immobile until
you send command to resume the fuel supply
Remote fuel resume
SMS command: resume+password
Tracker response: Resume engine Succeed
Example: resume123456
This means tracker will now resume the fuel & power supply.
6.14 Fuel sensor calibrating
For reasons such as different fuel tank heights and specifications, tracker needs to
set the proper height to zero and full values in order to read the correct percentage
value.
Calibrate 0% when the fuel tank is empty:
SMS command: oilzero+password
Tracker response: oilzero ok!
Example: oilzero123456
Calibrate 100% after fill the fuel tank 100%:
SMS command: oilfull+password
Tracker response: oilfull ok!
Example: oilfull123456
You can connect the original car's voltage type fuel sensor, the applicable range is
0 ~ 5V. If the original one cannot be used, then an external voltage type fuel
sensor is the solution.