User's Manual

25
6.15 Configure times of alarm SMS
The times of the message of a continuous alarm can be configured. 3 times
messages by default.
SMS command: xtime+password+times value
Tracker response: xtime ok!
Example: xtime123456 005 (It means to send messages 5 times.)
Note: The times value must be 3 digits.
6.16 Alarms
6.16.1 Low battery alarm
This feature is activated by default, when the battery is low, tracker will send
message “low battery + latitude & longitude” to authorized numbers for 2 times
at 15 minutes interval.
Note: The times of this alert cannot be configured by the xtime command.
SMS command to deactivate: lowbattery+password+space+off
Tracker response: lowbattery off ok
Example: lowbattery123456 off
SMS command to activate: lowbattery+password+space+on
Tracker response: lowbattery on ok
Example: lowbattery123456 on
6.16.2 Power disconnection alarm
This feature activate by default. Tracker will send “Power alarm+latitude &
longitude” to authorized numbers every 3 minutes when external power
disconnected
SMS command to deactivate: extpower +password+space+off
Tracker response: extpower off ok
Example: expower123456 off
SMS command to activate: extpower +password+space+on
Tracker response: extpower on ok
Example: expower123456 on