User's Manual
Table Of Contents
- Summary
- Applications
- Hardware Description
- Specifications
- Start to use
- Function details
- Changing password
- Authorization
- Single tracking
- Continuous interval tracking
- Smart angle updating
- GPS drift suppression
- Exact street address
- Location based service (LBS) / Cell-ID tracking
- Auto answer
- Forwarding incoming SMS messages
- SIM Card Balance Enquiry
- ACC ON/OFF Alert
- Remote immobilizing
- Fuel sensor calibrating
- Configure times of alarm SMS
- Alarms
- Remote control function (For B model)
- Arming
- Silent Arming
- Disarming
- Alarm function in arming state
- Sleep
- Check Status
- Check IMEI
- Local time setting
- Reset Hardware
- GPRS configuration for live real-time tracking
- Activate Fuel value in GPRS data
- Configure SMS management center number
- Configure heartbeat package interval
- Initialization
- Cautions
- Troubleshooting
33
SMS command: time+space+zone+password+space+time zone value
Tracker responds: time ok
Example: time zone123456 8
Note: 8 is the time zone of China, If your country time zone is minus, write the
time zone value with a “-“ symbol, for example, time zone123456 -8.
6.26 Reset Hardware
This command will reboot the GSM and GPS modules of the tracker. Please note
this will not restore factory settings.
SMS Command: reset+password
Tracker Response: reset ok
Example: reset123456
6.27 GPRS configuration for live real-time tracking
6.27.1 Configure APN, GPRS login user name and password
Usually, tracker can automatically recognize and select the APN and GPRS’ user
name and password without any configuration. If it cannot connect to the
network,
Please configure it according to following steps.
6.27.1.1 Configure APN setting
APN is an abbreviation for Access Point Name and changes
depending on which mobile network you are using. For more
information about your local APN, please check with your local
wireless carrier.
SMS command: APN+password+space+local APN
Tracker response: APN OK
Example: APN123456 CMNET
Note: 123456 is tracker’s default password, you can change the