User's Manual
Table Of Contents
- Summary
- Applications
- Hardware Description
- Specifications
- Start to use
- Function details
- Changing password
- Authorization
- Single tracking
- Continuous interval tracking
- Smart angle updating
- GPS drift suppression
- Exact street address
- Location based service (LBS) / Cell-ID tracking
- Auto answer
- Forwarding incoming SMS messages
- SIM Card Balance Enquiry
- ACC ON/OFF Alert
- Remote immobilizing
- Fuel sensor calibrating
- Configure times of alarm SMS
- Alarms
- Remote control function (For B model)
- Arming
- Silent Arming
- Disarming
- Alarm function in arming state
- Sleep
- Check Status
- Check IMEI
- Local time setting
- Reset Hardware
- GPRS configuration for live real-time tracking
- Activate Fuel value in GPRS data
- Configure SMS management center number
- Configure heartbeat package interval
- Initialization
- Cautions
- Troubleshooting
36
SMS command: protocol+password 12
Tracker response: protocol 12 ok
Example: protocol123456 12
Note: By default, tracker is connected to tracker.baanool.net:8090 with fuel value,
so no need to configure this step. If you are using another IP or domain name, use
this command to activate the fuel value.
6.29 Configure SMS management center number
SMS command: centernum+password+space+phone number
Tracker response: centernum ok
Example: centernum123456 13322221111
After the SMS management center number is set successfully, the "Continuous
interval tracking" messages will be sent to this number. If the management center
number needs to receive the alarm notification message, please set this number as
an authorized number too.
Cancel SMS management center number
SMS command: nocenternum+password
Tracker response: nocenternum ok
Example: nocenternum123456
6.30 Configure heartbeat package interval
The default heartbeat interval to keep GPRS connection alive is 100 seconds; you
can change it if necessary, but please be kindly informed that if the time interval
is too long, it may cause GPRS disconnection.
SMS command: heartbeat+password+space+time interval
Tracker response: heartbeat ok
Example: heartbeat123456 120
Note: (123456 means tracker’s password, 120 means the interval.
The minimum interval is 60 seconds, and tracker will continue to send
heartbeat every 60 seconds if you configure it less than 60 seconds.
6.31 Initialization
If the tracker cannot work properly, you can send command to initialize it to