User's Manual
Table Of Contents
- Summary
- Applications
- Hardware Description
- Specifications
- Start to use
- Function details
- Changing password
- Authorization
- Single tracking
- Continuous interval tracking
- Smart angle updating
- GPS drift suppression
- Exact street address
- Location based service (LBS) / Cell-ID tracking
- Auto answer
- Forwarding incoming SMS messages
- SIM Card Balance Enquiry
- ACC ON/OFF Alert
- Remote immobilizing
- Fuel sensor calibrating
- Configure times of alarm SMS
- Alarms
- Remote control function (For B model)
- Arming
- Silent Arming
- Disarming
- Alarm function in arming state
- Sleep
- Check Status
- Check IMEI
- Local time setting
- Reset Hardware
- GPRS configuration for live real-time tracking
- Activate Fuel value in GPRS data
- Configure SMS management center number
- Configure heartbeat package interval
- Initialization
- Cautions
- Troubleshooting
6
4 Specifications
Product name LTE wireless data terminal
Model 403
DIM. 9.6×5.3×1.8cm
Weight
70g
Network
GSM/GPRS/LTE
Band
4G (B1/B2/B3/B4/B5/B7/B8/B20/B28)
2G (1900/1800/900/850 MHz)
GPS sensitivity
-165dBm
GPS accuracy 5m
Time To First Fix
Cold status 45s
Warm status 35s
Hot status 1s
Applicable car
power
12V-24V
Battery Chargeable changeable 3.7V 350mAh Li-ion battery
Storage Temp. -40°C to +85°C
Operation Temp. -20°C to +55°C
Humidity 5%--95% non-condensing
5 Start to use
5.1 Terminal installation
Please ask a qualified engineer to install it.
The installation environment should not exceed the GSM performance index.
Please do not install it in a dusty and humid environment.
Find the 12PIN wiring harness provided with the product, insert it into the
corresponding wiring hole of the product, and connect to the original car
circuit as shown in the following figure: