User's Manual
Table Of Contents
- Summary
- Applications
- Hardware Description
- Specifications
- Start to use
- Function details
- Changing password
- Authorization
- Single tracking
- Continuous interval tracking
- Smart angle updating
- GPS drift suppression
- Exact street address
- Location based service (LBS) / Cell-ID tracking
- Auto answer
- Forwarding incoming SMS messages
- SIM Card Balance Enquiry
- ACC ON/OFF Alert
- Remote immobilizing
- Fuel sensor calibrating
- Configure times of alarm SMS
- Alarms
- Remote control function (For B model)
- Arming
- Silent Arming
- Disarming
- Alarm function in arming state
- Sleep
- Check Status
- Check IMEI
- Local time setting
- Reset Hardware
- GPRS configuration for live real-time tracking
- Activate Fuel value in GPRS data
- Configure SMS management center number
- Configure heartbeat package interval
- Initialization
- Cautions
- Troubleshooting
9
Example: APN123456 CMNET
Note: 123456 is the default password, please change password on APP or
refers to 6.1. CMNET is the APN of China mobile.
5.5.2 Configure user name and password of GPRS
In the most countries, the user name and password of GPRS are not necessary;
therefore, you can ignore this step if it is not necessary for your local network.
For those countries requiring user name and password, please configure as
following:
SMS command: up+password+space+user+space+password
Tracker response: user, password ok!
Example: up123456 Jonnes 666666
Note: 123456 means the password of the device, Jonnes means the user name
of gprs, and 666666 means password of gprs, please configure it according to
the user name and password of your local ones, you can check this
information with your local wireless carrier.
5.6 Mobile APP
5.6.1 Scan the QR code to download APP
Google Play、App Store search “BAANOOL IoT” to download it.