User's Manual

0201 03 04
Thank you for selecting our latest Bluetooth headphone, please
read this User's Manual carefully before you operate this
headphone, and please save this Manual for further reference.
Before operating, please read all the Safety notice to make sure
the safe and appropriate use.
Safety Notice:
Please observe the rules of the Country or Region which you
are in while driving.
Do not disassemble or modify the
headphone at any reason,
otherwise, It may damage or burn the
headphone .
If there is any quality problem, please send the
headphone to
authorized service center for repairing.
Please keep the equipment along with all the accessories out
of the reach of children and pets. It will cause suffocation and
serious injury.
Do not put the device under the environment which the
temperature is too low or too high ( Below 0℃ or over 45℃).
Extreme temperatures will cause the device deformation,
reduce the charging capacity and shorten the working life.
Please do not wet the device, for the liquid can cause serious
damage to the device. Please do not touch the device by wet
hands. It is out of the maintenance range for the damage
caused by water.
Please avoid closing to the eyes of children and pets when
using the flash indicator of the device.
Please do not operate the device in thunderstorm weather.
It will damage your hearing if you listen with high
volume for a long time. It is recommended that
only use the lowest volume which is necessary
for speaking and listening to music.
1. Guide
■ Heaphone introduction
2.Instruction
■ Key Function
User's Manual
KBJ-225N
立体声蓝牙耳机
使用说明书
Bluetooth 4.0
Stereo Headphone
■ How to connect with two Bluetooth mobile phones:
Play/Pause
Receive
Hang up phone call
Re-dial the last
phone No
Previous song
Volume Increase
Next Song
Volume Decrease
head pad
Ear cushion
D3.5mm Plug port
Foldable
Microphone
USB Charging Port
Power switch
Pairing
LED indicator
※ Contents: Bluetooth Headphone, USB Charging Cable,
3.5mm Audio Cable, User’s Manual
USB Charging Cable:
3.5mm Audio Cable:
Switch on : Press 2 seconds to switch on , the Blue
indicator will be in (It will appear voice prompts in
English). Press 2 seconds again to enter into pairing
mode, meanwhile the red and blue indicators take
turns to flash. It will turn off automatically when no
device to connect in 5 mins ) .
Switch off : Press 4 seconds to switch off , the Red
indicator flashes one time means the device is
switched off.
Press “Function Key” to receive phone call, press it
again to end the phone call.
Press the key by twice continuously to re-dial the last
phone number.
Press the key for 2 seconds to reject the phone call.
In Music Mode, press it for 1 time to pause, and press
it again to play. (when phone call comes, the music will
be off. When phone call is off, the music will continue)
In Music Mode, press it to play previous song.
In Music Mode, press it to play next song.
Long press to increase volume all
the time. The voice prompts will appear when the volume
up to Maximum.
Previous song
Next Song
Volume Increase
Volume Decrease
Play/Pause
Receive
Hang up phone call
Re-dial the last
phone No
Power switch
Pairing
Long press to decrease volume all the time.
■ Voice Prompt Function
Battery low warning
Bluetooth is turned on
Bluetooth enter pairing mode
Volume max
Bluetooth is turned off
VOICE PROMPT
STATUS
When you turn the headphone off
When you turn the headphone on
When entering into paring mode
When you connect the second mobile phone
When the volume up to the maximum
When you connect the first mobile phone
Bluetooth is connected
Bluetooth is connected
Battery low
(1) Turn on the bluetooth function of mobile phone 1.
(2) Press the” ” for 4 seconds of the bluetooth headset, switch
on and enter into pairing mode, blue and red indicators take
turns to flash, make connection with phone 1
(3) press the ” ” again for 2.5 seconds, the red and blue
indicators take turns to flash and searching connections
automatically; meanwhile, phone 1 is disconnected.
(4) Turn on the bluetooth function of the mobile phone 2 and
search KBJ-225N from the list, make connection.(Input the
password 0000 if needed and the connection will be made)
(5) Turn off the bluetooth headset and return on, the headset
will connect with both mobile phones automatically. The
voice “Bluetooth is connected, bluetooth is connected” will
appear in English.