Stereo Headphone KBJ-261N User's Manual
Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 0 Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 - 1 6 Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 7 Project Specification and Instruction. . . . . . . . . . . . . . . . .
Thank you for selecting our latest Bluetooth headphone, please read this Manual User carefully before you operate this headphone, and please save this Manual for further reference. Before operating, please read all the Safety notice to make sure the safe and appropriate use. Safety Notice: Please observe the rules of the Country or Region which you are in while driving.
1. Guide ■ Headphone introduction Soft and comfortable cover Foldable Previous song Charging Plug Volume Increase Power switch; Play/ Pause Receive/Hand off phone call Next Song Volume Decrease D3.
Foldable Retractable USB Charging Cable: 3.5mm Audio Cable: ※ Accessory Contents: Bluetooth Headphone, USB Charging Cable, 3.
2.Instruction ■ Key Function Switch on : Press 3 seconds to switch on , the Blue indicator will be in (It will appear voice prompts in English). When the red and blue indicators take turns to flash, it Power switch enters into Pairing mode, (It will appear the voice prompts when no devices to connect) . Switch off : Press 3 seconds to switch off , the Red indicator flashes two times means the device is switched off.
■ Voice Prompt Function Voice Prompt Status Power on When you turn the headphone on Phone 1 connected When you connect the first mobile phone Phone 2 connected When you connect the second mobile phone Your headphone is disconnected When you have no devices to connect Your headphone is disconnected When you disconnect the headphone from the fist mobile phone Your headphone is disconnected When you disconnect the headphone from the second mobile phone Incoming call When a call comes in Maximum
(1) Turn off the bluetooth of the first mobile phone. (2) The red and blue indicators take turns to flash for searching connection automatically. (3) Turn on the bluetooth of the second mobile phone and search for headphone. (4) Find the headphone KBJ-261N from the device list of the second mobile phone, and make the connection. (5) Input the password 0000 if needed and the connection will be made (voice prompts). (6) Turn off the bluetooth headphone, and disconnect the second mobile phone automatically.
5.Headphone Charging This headphone is equipped with built-in non-detachable and rechargeable battery. Please make sure that the battery is charged full for the first time use ■ Connect the adapter to the charging plug. ■ Insert the power adapter into the standard power plug. During the charging, indicator will turn to Red. If without charging, please plug out the travel charger first, then connect it again. ■ After full charging, red indicator will be off.
7.Tips ■ Question: Which devices will disturb phone call when using headphone ? Answer: The devices such as cordless mobile phone and wireless network equipment will cause interference, it sounds like static normally. In order to reduce interference, please do not put the headphone close to other devices which use or send out wireless radio.
8.Project Specification and Instruction - Bluetooth Version : 2.1 - The supported devices: Bluetooth mobile phones, Bluetooth speakers Bluetooth PC and other Bluetooth devices - The Maximum work range: 33 Feet (10 Meters) - Standby time: Around 300 Hours - Music play/Talk time: Around 15 Hours - Charging time: 4 Hours - Charging Voltage: DC 5V - Work Voltage: 3.7V - Sensitivity: 113±3DB - Frequency Response: 20Hz~20KHz ※ The actual time may vary from mobile phone types and functions.
Stereo Headphone www.compoka.
FCC Certification Requirements Caution: Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
