User's Manual

 4). Send message through software
Open the software, input the pager No. and the message needs to be sent, the
length of the message is 48 digits or letters, then click send, if the software appear a
successful prompt and the TX light of the host is on, which means the message is sent
successfully. The pager will receive messages successfully.
 5). Usage of palm transmitter
Urge dishes and dispatch function can be realized by palm transmitter.
a. Program the palm transmitter and host to urge dishes mode(A mode), input
the table No.( call button No.) of the related dishes on palm, press SEND, then the
waiter will receive the message and go to fetch dishes.
b. Program the transmitter and host to dispatch mode(B mode), input a three
digit number of the pager and maximum 5 digit table No. One palm, then press SEND
to send this table message to waiter pager to dispatch the waiter serve for that table
Notes: In this mode, the pager number has to be three digits, such as, No.1
please input as 001. Table No. can be from one to five digits, such as 1, 01, 001, 0001,
00001 which all means table No. 1.
 6). Monitor function:
After programming the monitor function, choose the relative monitor method, it
will send back to the monitor relative monitoring information.
 7) USB upgrade:
After using CA software to download the program successfully, the
host need to be repowered on. While power on, if “R” and “T” light
flashes, which means it’s upgrading. If it stops flashing, it means