User's Manual

Picture 4.4 Staff Group Paging Interface
The staff group paging interface is the same as the single paging. The only
difference is that the display content in the main display area. The group displayed in
the screen is edited by the operator in advance, and download it in the transmitter.
After chosen the group number, the middle area would show the group members
number , click "Send" the message would be sent to all of the chosen members.
There's automatic group function in the group paging(with the same baud rate, Polar) .
If all the same, it would send out as one message, or would reclass then send out
separately.
Remark：In the Group Paging interface won't support the class paging function
4.1.4 interface set up
The set up interface mainly set up the transmitter parameter. The setup parameter
including: transmitting power, backlight brightness, voice, time sending, heartbeat,
sending interval, system time, password modification, testing mode, restore factory
setting. All of these setting operated in the setting interface. Only the administrator
could enter which need the password.
16