User's Manual

Installing/Removing the Battery Pack

To install the battery, please place it into the groove on the top of the radio chassis about 5mm

away from latch.

If the radio has the belt clip installed, you will have to press one side of the clip, to raise it and

slide the battery in proper position.

Press the battery with your fingers and push the battery until you hear a latch click, the battery is

now installed.

Removing the battery pack：

If you want to remove the battery from the radio, first press the battery latch located

on the bottom of the radio, and then press down to slide the battery about 5mm to release

the latch.

Notice:

* Do not short-circuit the battery terminals or dispose the battery in fire.

* Do not disassemble the battery case.