Instruction Manual

•The text message to a subscriber alias or ID is pending transmission,
followed by waiting for acknowledgement

■ LEDIndicator
Blinkingred–Radioisatlowbatterycondition
SolidOrange–Poweringup
Solidgreen–Radioisreceiving,ordetectingactivityovertheair.
SolidRED–Radioistransmitting
BlinkingOrang–Radioisscanning,orinselectivecall,oremergencystate

■ Powering
UpandTurningOfftheRadio
Rotate the On/Off/Volume Control Knob clockwise until you hear a click. You see a welcome
message.
TheLEDlightsupsolidorangeandtheHomescreenlightsupifthebacklightsettingissettoturn
onautomatically.
To turn off the radio, rotate this
 knob counterclockwise until you hear a click. You see a brief
PoweringDownontheradio’ sdisplay.

■ AdjustingtheVolume
Toincreasethevolume,turntheOn/OffVolumeControlKnobclockwise.
Todecreasethevolume,turnthisknobcounterclockwise.
■ AccessingtheRadiofromPassw ord
1.Powerupthe
radio.
2. Enter your current six‐digit password with the radio’ s keypad. The display shows****** .
PressOKtoproceed.
Youhearapositiveindicatortoneforeverydigitpresse d.Press
toremovetheeach*
onthedisplay.
3.Ifthepasswordiscorrect:
Yourradioproceedstopowerup.SeePoweringUpandTurningOfftheRadiopart
OR
Ifthepasswordisincorrect:
ThedisplayshowsPasswordInputError.RepeatStep2.

■ SelectingaZone
A zone is a group of channels. The full keypad and limited keypad radio supports up to 2000
channelsand250zones,withamaximumof999channelsperzone.
Usethefollowingproceduretoselectazone.

□ FullKeypadRadioandLimitedKeypadRadio
PresstheprogrammedZonebuttonand
proceedtoStep2.
OR
Followtheprocedurebelow.