User's Manual

VOX Level Selection
Press this button to enter the VOX Level Adjustment Mode”. Press
/ button to adjust VOX level. Press
O
button to save
the selected VOX level and quit this mode.
When pressing a Key, notice the different beeps you will hear
No beep, key pressed not acknowledge
one beep, feature enable
two beeps, feature disable
“Error” beep, key pressed invalid
５. Radio Call
５.1. Selective Call
５.1.1 Send Selective Call
A. Press “Menu Select/Enter” button to enter the menu mode.
B. Press
/ button until “RADIOCAL”.
C. Press
O
button to select “SEL CALL”.
D. Press
/ button until the required call list appears.
E. Press “PTT” button to send the selective call.
F. Press “PTT” button and speak to the microphone in normal voice. Please keep the
microphone about 3 to 4 cm far from your mouth. After speaking, please loosen the
“PTT”.
G. Press
C
button to return to the previous operation.
５.1.2 Receive Selective Call
Receiving a selective call, you will hear the alert tone and the LED indicator will blink
orange.
Icon flashes and the caller’s ID or name displays.
Press PPT button for callback.
５.2 Call Alert
After the radio receives the call alert, the alert tone will sound and the orange indicator
flicker.
icon flashes and the caller’s ID code or name shows until someone answers.
Press the “PTT” button for callback or other buttons for cancellation.
A. Press “Menu Selection/Enter” button to enter the menu mode.
B. Press
/ button until “RADIOCAL”.
C. Press
O
button to select “CALL ALT”.
D. Press
/ button until the required call list is showed.
E. Press “PTT” button to send the call.
F. After calling, press
C
button to return the previous operation.
6. Select Zone
According to the setup of the communication network, the radio can be distributed to
different zones. Select the proper zone to realize communicating with the radio from a
different zone.