User's Manual

Instructions for Operation
After all connection are completed, press the Power
Button ( ) for 3 seconds to power on the oximeter,
referring to below figure. When the oximeter is
powered up, the Power Indicator (yellow lamp )
will light constantly. If the heart beat is detected, the
Heartbeat Indicator (red lamp ) flashes according
with the heart rate. At the same time the oximeter
sends the measured data (SpO
2
and PR) to Baby
Monitor in a given time interval via wireless
communication, and the SpO
2
and PR value will be
displayed on the terminal side of Baby Monitor.
NOTES:
Appearance of the Pulse Oximeter
1. The oximeter has no automatic power-off function.
Press the Power Button for 3 seconds to turn it off
after the end of each use.
2. If the Power Indicator flashes it means the battery
voltage is low for the oximeter, please replace the
batteries.