User's Manual

User Manual for All-in-One Health Monitor
Page VII/69
2.2 Installation
2.2.1 Power Supply
1. Internal power supply by the built-in battery
When the battery indicator " " displays full grids, the built-in battery is fully charged. When it blinks, the battery
voltage is low, and the user should charge the battery by connecting the device to the AC power adapter or a USB
power source via USB cable. When the grids of the battery indicator are rolling circularly, the battery is being charged.
2. External power supply from the AC power adapter
Use the AC power adapter provided by the manufacturer. Make sure that the mains power supply is AC100V-AC240V
with 50/60Hz.
2.2.2 Starting the Monitor
By pressing and holding down the switch, the software version will be displayed, after releasing the switch, the device
will enter the measurement display screen automatically. The user can then begin to operate the monitor.
 If the monitor fails to start by pressing the switch, please use the external power supply.