User's Manual

User Manual for All-in-One Health Monitor
Page XXXVIII/69
Operation Instructions:
1. Press and hold the" "key, and release after hearing one beep, to enter into the setup screen. When the patient
ID blinks, the setup function is available.
2. A short press of the " / " key enables or disables the wireless transmission function.
3. A short press of the " " key confirms the setting. The beeping mark " " will blink.
4. A short press of the " / " key enables or disables the pulse beep.
5. A short press of the " " key confirms the setting. The "kPa" (blood pressure unit) will blink.
The functions of wireless transmission, beep, blood pressure unit, temperature unit, date and time can be set by
following the above steps.
6. Press and hold the " " key to bring the screen display back to the measurement display screen. The monitor will
also switch back to the measurement display screen if there has been no operation for 30 seconds.
Note:1. On the setup display screen, all parameters can be set in anticlockwise order by pressing and holding the "
" key.
2. For setting the date, the century is fixed to be 20, i.e. “13y” indicates the year
2013. Please see the following example for the date and time: 11:14", March 23, 2013.