User's Manual

User Manual for All-in-One Health Monitor
Page XL/69
Note: when selecting the patient ID, the screen only displays patients with history data records.
3.4 Data Uploading
1. When the wireless transmission function is on, the monitor can communicate with a host for viewing and
management.
a. Open the host ’s wireless function and procedure and start to scan the PC-303 monitor.
b. The host will pair with the PC-303 monitor at a moment.
c. After connecting, the host can display and manage the measurement data of PC-303 by wireless.
 The pairing and transmitting distance of wireless function is 8 meters in the normal. If the host can’t pair with the
PC-303, you will try to narrow the distance between the host and PC-303.
 The PC-303 can pair and transmit with the host under the wireless coexistence environment, but other wireless
device may still interface with pairing and transmission between the host and the PC-303 device under uncertain
environment. If the host and the PC-303 display inconsistent, you may need to change the environment.
2. When connected to a USB cable, the history data (including the measured SpO
2
, PR, TEMP and ECG data etc.) can
be uploaded to host for viewing and management.