User's Manual

User Manual for Fingertip Oximeter
4
3 Operation
3.1 Directly measurement
1. Open the clip as shown in Figure 3.
Figure 3 Put finger into the Oximeter
2. Put finger into the rubber cushions of the clip (make
sure the finger is in the correct position), and then
clip the finger.
3. The device will power on automatically in 2 seconds,
and start to display software version number.
4. Next enter into data display screen (as shown in
Figure 4). User can read the values and view the
waveform from display screen.
Figure4A Figure4B