User's Instructions
Table Of Contents
- User instructions
- * Avoid using this product for long-term exposure to the sun or dust
- * Be sure to use the product within the temperature and humidity range
- * Do not operate the product under vibration or strong magnetic field
- * Do not put conductive materials in the ventilation holes of the product
- * Without the guidance of professionals of our company, please do not open the product case by yourself
- * Before power on, make sure that the input voltage of the adapter is AC110V-220V, and the output voltage and current meet the product specifications
- * Before inserting the battery, ensure that the battery voltage meets the product specifications About this manual
- This manual details the product specifications and interface descriptions, instructions for use, precautions, and troubleshooting. Please read the instructions carefully before using the product. If you have any questions or difficulties in using this...
- Product Brief
- This product is a wireless video transmission system based on the 5GHz frequency band, with a maximum video resolution of 1080P60Hz, which can be widely used in commercial live broadcast, event live broadcast, film and television shooting, campus radi...
- System connection diagram
- This product includes a transmitter and a receiver. The transmitter supports 1 HDMI input and SDI input and loop-out. The receiver supports 1 HDMI and 2 SDI output at the same time. The following is a schematic diagram of the application connection of...
- Product Highlights
- High-quality low-latency video
- Support HD-SDI & 3G-SDI input and output, support HDMI full HD input and output, the highest resolution is 1080P60Hz. Using H.264 codec technology, the image is high-definition, and the delay is as low as 70ms
- Product packaging details
- After unpacking, please check the packing list details, if there are missing parts, please contact the dealer. The parts involved in each model are subject to the following packing list.
- OLEDDisplay instructions
- TX:7103
- RX:3103
- Switch channel
- Code operation
- Working mode and switching
- 1. Point-to-point mode
- In the point-to-point mode, the video source is given to the transmitter through HDMI or SDI, and the receiver will output the received signal to the video channel through HDMI and SDI interfaces to monitors, switch stations and other products.
- 2. Pull flow mode
- In pull-stream mode, the video source can be simultaneously transmitted to the receiver, mobile phone, iPad, etc. products that are in the same network as the transmitter via WiFi networking through the HDMI or SDI interface of the transmitter: the re...
- on the screen.
- Work mode switch
- 1. Switching between the two operating modes requires operation on the transmitter and receiver (the transmitter and receiver need to work in the same mode for the transmitter and receiver to be in a normal connection).
- 2. The product's factory mode is point-to-point mode.
- 3. Press and hold the MODE button of the transmitter and receiver for 3 seconds to switch the mode. When switching from point-to-point mode to pull-current mode, the word "RTSP" will be displayed on the OLED display; when switching from pull-current m...
- Pull flow mode operation
- Instructions for using the mobile APP
- Firmware upgrade Product specification
- Precautions
- Trouble shooting
User instructions
Thank you for choosing CVW's professional wireless high-
definition audio and video transmission products. Before using
this product, please read the following precautions carefully:
* Avoid using this product for long-term exposure to the sun or dust
* Be sure to use the product within the temperature and humidity range
* Do not operate the product under vibration or strong magnetic field
* Do not put conductive materials in the ventilation holes of the product
* Without the guidance of professionals of our company, please do not open
the product case by yourself
* Before power on, make sure that the input voltage of the adapter is
AC110V-220V, and the output voltage and current meet the product
specifications
* Before inserting the battery, ensure that the battery voltage meets the
product specifications
About this manual
This manual details the product specifications and interface
descriptions, instructions for use, precautions, and
troubleshooting. Please read the instructions carefully before
using the product. If you have any questions or difficulties in
using this product, please contact our company or distributor in
time.
Product Brief
This product is a wireless video transmission system based on
the 5GHz frequency band, with a maximum video resolution of
1080P60Hz, which can be widely used in commercial live
broadcast, event live broadcast, film and television shooting,
campus radio and other fields.
System connection diagram
This product includes a transmitter and a receiver. The
transmitter supports 1 HDMI input and SDI input and loop-out.
The receiver supports 1 HDMI and 2 SDI output at the same time.
The following is a schematic diagram of the application
connection of this product.