User's Instructions
Table Of Contents
- User instructions
- * Avoid using this product for long-term exposure to the sun or dust
- * Be sure to use the product within the temperature and humidity range
- * Do not operate the product under vibration or strong magnetic field
- * Do not put conductive materials in the ventilation holes of the product
- * Without the guidance of professionals of our company, please do not open the product case by yourself
- * Before power on, make sure that the input voltage of the adapter is AC110V-220V, and the output voltage and current meet the product specifications
- * Before inserting the battery, ensure that the battery voltage meets the product specifications About this manual
- This manual details the product specifications and interface descriptions, instructions for use, precautions, and troubleshooting. Please read the instructions carefully before using the product. If you have any questions or difficulties in using this...
- Product Brief
- This product is a wireless video transmission system based on the 5GHz frequency band, with a maximum video resolution of 1080P60Hz, which can be widely used in commercial live broadcast, event live broadcast, film and television shooting, campus radi...
- System connection diagram
- This product includes a transmitter and a receiver. The transmitter supports 1 HDMI input and SDI input and loop-out. The receiver supports 1 HDMI and 2 SDI output at the same time. The following is a schematic diagram of the application connection of...
- Product Highlights
- High-quality low-latency video
- Support HD-SDI & 3G-SDI input and output, support HDMI full HD input and output, the highest resolution is 1080P60Hz. Using H.264 codec technology, the image is high-definition, and the delay is as low as 70ms
- Product packaging details
- After unpacking, please check the packing list details, if there are missing parts, please contact the dealer. The parts involved in each model are subject to the following packing list.
- OLEDDisplay instructions
- TX:7103
- RX:3103
- Switch channel
- Code operation
- Working mode and switching
- 1. Point-to-point mode
- In the point-to-point mode, the video source is given to the transmitter through HDMI or SDI, and the receiver will output the received signal to the video channel through HDMI and SDI interfaces to monitors, switch stations and other products.
- 2. Pull flow mode
- In pull-stream mode, the video source can be simultaneously transmitted to the receiver, mobile phone, iPad, etc. products that are in the same network as the transmitter via WiFi networking through the HDMI or SDI interface of the transmitter: the re...
- on the screen.
- Work mode switch
- 1. Switching between the two operating modes requires operation on the transmitter and receiver (the transmitter and receiver need to work in the same mode for the transmitter and receiver to be in a normal connection).
- 2. The product's factory mode is point-to-point mode.
- 3. Press and hold the MODE button of the transmitter and receiver for 3 seconds to switch the mode. When switching from point-to-point mode to pull-current mode, the word "RTSP" will be displayed on the OLED display; when switching from pull-current m...
- Pull flow mode operation
- Instructions for using the mobile APP
- Firmware upgrade Product specification
- Precautions
- Trouble shooting
Product Highlights
High-quality low-latency video
Support HD-SDI & 3G-SDI input and output, support HDMI full HD input
and output, the highest resolution is 1080P60Hz. Using H.264 codec
technology, the image is high-definition, and the delay is as low as 70ms
Product packaging details
After unpacking, please check the packing list details, if there are missing
parts, please contact the dealer. The parts involved in each model are subject
to the following packing list.
Beam-Forming
Combining 2x2 MIMO and Beam-Forming (beam forming) technology makes
the wireless beam more concentrated and more directional in the direction
of transmission to reception, higher signal-to-noise ratio, and a longer
transmission distance
Stronger anti-interference ability
Point-to-point mode and pull flow mode
Support two working modes of point-to-point and RTSP pull flow and can
be switched. In the point-to-point mode, the product supports one send and
one receive and the video output interface is HDMI and SDI. In the RTSP
pull-stream mode, the product supports one send, one receive, and one
send, multiple receive. There are more options for different applications.
01
02