User's Manual

The receiver receives and outputs
video to TV or monitor
Please prepare another matching HDMI cable when the camera is Mini-HDMI or
standard HDMI interface.
Notification!
WIFI connection of Transmitter and receiver
1. Please press the 【power key】of the transmitter and receiver for more than 1 second,
the power indicators of both the transmitter and the receiver will on, at the same
time the power on logo will appear on the product screen. The transmitter system
start-up time is about 20 seconds. The receiver system start-up time is about 30
seconds, please be patient.
2. After the system setup, the product will perform WiFi connection, at this time the
blue WiFi indicator of the transmitter and receiver will begin to slow flash.
3. After WIFI connected, the blue WiFi indicator of the transmitter and receiver
will keep on.
The camera power on and output video
to the transmitter
After opening the camera, the camera will transmit the audio and video to the
connected transmitter via the HDMI cable.
1. Please use the attached Mini-standard HDMI cable of which one end is Mini-HDMI
male and another end is standard HDMI male. Please connect the receiver to a TV
or monitor with standard HDMI video input interface.
2. After the WIFI connection of the transmitter and receiver succeed, the receiver will
receive and decode the video stream from the transmitter in real time, and output
it to the connected TV or monitor through the HDMI line.
1. The receiver cannot be connected to the laptop via HDMI cable, because the
laptop is HDMI video output interface, and it cannot support video input.
Notification!
2. When viewing video via a TV or a monitor, the receiver will re-connect with the
transmitter if you short press the【channel switch】key on receiver, and the TV
or monitor screen will be stuck and then blank.The image will be restore after
about 40 seconds, please be patient.
Watch videos via iphone/iPad
Please find the receiver SSID which is one 15 bit character string with FREECAST_ as
prefix through the "Wi-Fi" item in the “SETTING” page of your iPhone/iPad and
click SSID to connect it. The default WiFi password is 12345678. After iphone or
ipad is connected to the receiver ’s WiFi, you can launch Freecast App and watch
images from receiver in real time. The Freecast APP Live View at the top of the page
will display the name of the SSID receiver.
Transmitter rate specification
You can choose the quality level corresponding to different transmitter video rate
settings via Freecast App. The transmission distance between the transmitter and
the receiver, and the number of clients that can be connected to the receiver
simultaneously are related to the setting of video rate.
Below is reference value in ideal conditions of indivisibility without interference.
Image
Quality
Transmitter
Rate
Transmission
Distance
Allowing people
watching at the same time
Good 1.5Mbps
700m
300m
500m
300m
Best
5Mbps
1
3
1
2