User Guide

ManualsBrandsSHENZHEN CYTON Intelligence Technology ManualsCamera & PhotoBattery Camera

Maufacturer : SHENZHEN CYTON Intelligence Technology CO.,LTD

Address: F/L 601, Building K, Jingchangda, No. 2000089 Shangwei industrial zone, Zhangkengjing community,

Guanhu street, Longhua District, Shenzhen, China

Battery Camera Q3

ORIGINALITY DESIGN SMART - AND BEAUTIFUL

QUICK GUIDE

Summary of content (8 pages)

PAGE 1
Battery Camera Q3 ORIGINALITY DESIGN SMART - AND BEAUTIFUL QUICK GUIDE Maufacturer : SHENZHEN CYTON Intelligence Technology CO.,LTD Address: F/L 601, Building K, Jingchangda, No.
PAGE 2
What's in the box Please consult this checklist for all parts.
PAGE 3
Speaker Status light Microphone Lens Photosensitive PIR Reset Micro USB Charging indicator Power button SD card slot Power port Power on/off DC 5V±10% Press the button for 3 seconds to turn on/off the camera Status light Solid red light on: the camera is turning on or malfunctional Blinking red light: awaiting WiFi connection (slowly blinking) connecting the WiFi (quickly blinking) Blinking blue light: currently connecting Solid blue light on: the camera runs correctly SD card slot Support local SD
PAGE 4
Install Bracket Installation 3
PAGE 5
Connect Download CloudEdge is available for both iOS and Android OS. Search the name 'CloudEdge'in App Store or Google Play, or scan the QR-Code to download the App. ·Support ipad IOS Android Download App(IOS&android) Add device Log in the CloudEdge, select "Add Device", and add the smart camera to the App according to the screen tips(Make the smart camera close to the router when configuring).
PAGE 6
FAQ Q: The device cannot be previewed properly? A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again. Q: Why is it still in the list of devices after reseting? A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App.
PAGE 7
Functions Remote wake-up The camera will be in a sleep mode to save power; you can have a preview in App. Full-duplex audio You can see and hear the vistor in your App from the camera. PIR When the camera detects someone stopping by, it sends an alarm message to your cell phone. Low battery alarm When the battery power is lower than your set, the App will send a notification to your mobile phone. Record Using SD card or opening the Cloud-Storage Service, to keep recording for every moment.
PAGE 8
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.