User's Manual

*
1
2
Component Description
1
Power button Turns the speaker on or o when
pressed. The speaker automatically
connects to the last device paired
through Bluetooth®. If it cannot
nd that device, it automatically
enters pairing mode. To connect
to a device through Bluetooth, see
device documentation.
2
Volume down
button
Decreases the volume when
pressed.
3
Volume up
button
Increases the volume when
pressed.
4
Call button Answers or ends a call when
pressed. If connected to a device
through Bluetooth, plays or pauses
music when pressed.
5
Audio-in jack Connects the speaker to a device.
6
Micro USB port Connects the speaker to power. Be
sure to charge the speaker before
rst use.
7
Power light Solid white: The speaker is paired
or connected directly to an audio
device.
Blinking white and amber: The
speaker is pairing.
Blinking amber: The battery is low.
Solid amber: The speaker is
charging.
This product is rated IP-64, which means that it is
protected against dust and splashing water. To maintain
the IP-64 rating, close the I/O door. IP ratings are not a
guarantee of future performance. Coverage for damage
under IP-64 test conditions or any accidental damage
requires the purchase of an optional HP Accidental
Damage Protection Care Pack.
For regulatory and safety notices, refer to the Product
Notices included with your product.
*Cable not included.
Component Description
1
Power button Turns the speaker on or o when
pressed. The speaker automatically
connects to the last device paired
through Bluetooth®. If it cannot
nd that device, it automatically
enters pairing mode. To connect
to a device through Bluetooth, see
device documentation.
2
Volume down
button
Decreases the volume when
pressed.
3
Volume up
button
Increases the volume when
pressed.
4
Call button Answers or ends a call when
pressed. If connected to a device
through Bluetooth, plays or pauses
music when pressed.
5
Audio-in jack Connects the speaker to a device.
6
Micro USB port Connects the speaker to power. Be
sure to charge the speaker before
rst use.
7
Power light Solid white: The speaker is paired
or connected directly to an audio
device.
Blinking white and amber: The
speaker is pairing.
Blinking amber: The battery is low.
Solid amber: The speaker is
charging.
This product is rated IP-64, which means that it is
protected against dust and splashing water. To maintain
the IP-64 rating, close the I/O door. IP ratings are not a
guarantee of future performance. Coverage for damage
under IP-64 test conditions or any accidental damage
requires the purchase of an optional HP Accidental
Damage Protection Care Pack.
For regulatory and safety notices, refer to the Product
Notices included with your product.
*Cable not included.
Component Description
1
Power button Turns the speaker on or o when
pressed. The speaker automatically
connects to the last device paired
through Bluetooth®. If it cannot
nd that device, it automatically
enters pairing mode. To connect
to a device through Bluetooth, see
device documentation.
2
Volume down
button
Decreases the volume when
pressed.
3
Volume up
button
Increases the volume when
pressed.
4
Call button Answers or ends a call when
pressed. If connected to a device
through Bluetooth, plays or pauses
music when pressed.
5
Audio-in jack Connects the speaker to a device.
6
Micro USB port Connects the speaker to power. Be
sure to charge the speaker before
rst use.
7
Power light Solid white: The speaker is paired
or connected directly to an audio
device.
Blinking white and amber: The
speaker is pairing.
Blinking amber: The battery is low.
Solid amber: The speaker is
charging.
This product is rated IP-64, which means that it is
protected against dust and splashing water. To maintain
the IP-64 rating, close the I/O door. IP ratings are not a
guarantee of future performance. Coverage for damage
under IP-64 test conditions or any accidental damage
requires the purchase of an optional HP Accidental
Damage Protection Care Pack.
For regulatory and safety notices, refer to the Product
Notices included with your product.
*Cable not included.
Component Description
1
Power button Turns the speaker on or o when
pressed. The speaker automatically
connects to the last device paired
through Bluetooth®. If it cannot
nd that device, it automatically
enters pairing mode. To connect
to a device through Bluetooth, see
device documentation.
2
Volume down
button
Decreases the volume when
pressed.
3
Volume up
button
Increases the volume when
pressed.
4
Call button Answers or ends a call when
pressed. If connected to a device
through Bluetooth, plays or pauses
music when pressed.
5
Audio-in jack Connects the speaker to a device.
6
Micro USB port Connects the speaker to power. Be
sure to charge the speaker before
rst use.
7
Power light Solid white: The speaker is paired
or connected directly to an audio
device.
Blinking white and amber: The
speaker is pairing.
Blinking amber: The battery is low.
Solid amber: The speaker is
charging.
This product is rated IP-64, which means that it is
protected against dust and splashing water. To maintain
the IP-64 rating, close the I/O door. IP ratings are not a
guarantee of future performance. Coverage for damage
under IP-64 test conditions or any accidental damage
requires the purchase of an optional HP Accidental
Damage Protection Care Pack.
For regulatory and safety notices, refer to the Product
Notices included with your product.
*Cable not included.
Component Description
1
Power button Turns the speaker on or o when
pressed. The speaker automatically
connects to the last device paired
through Bluetooth®. If it cannot
nd that device, it automatically
enters pairing mode. To connect
to a device through Bluetooth, see
device documentation.
2
Volume down
button
Decreases the volume when
pressed.
3
Volume up
button
Increases the volume when
pressed.
4
Call button Answers or ends a call when
pressed. If connected to a device
through Bluetooth, plays or pauses
music when pressed.
5
Audio-in jack Connects the speaker to a device.
6
Micro USB port Connects the speaker to power. Be
sure to charge the speaker before
rst use.
7
Power light Solid white: The speaker is paired
or connected directly to an audio
device.
Blinking white and amber: The
speaker is pairing.
Blinking amber: The battery is low.
Solid amber: The speaker is
charging.
This product is rated IP-64, which means that it is
protected against dust and splashing water. To maintain
the IP-64 rating, close the I/O door. IP ratings are not a
guarantee of future performance. Coverage for damage
under IP-64 test conditions or any accidental damage
requires the purchase of an optional HP Accidental
Damage Protection Care Pack.
For regulatory and safety notices, refer to the Product
Notices included with your product.
*Cable not included.
Component Description
1
Power button Turns the speaker on or o when
pressed. The speaker automatically
connects to the last device paired
through Bluetooth®. If it cannot
nd that device, it automatically
enters pairing mode. To connect
to a device through Bluetooth, see
device documentation.
2
Volume down
button
Decreases the volume when
pressed.
3
Volume up
button
Increases the volume when
pressed.
4
Call button Answers or ends a call when
pressed. If connected to a device
through Bluetooth, plays or pauses
music when pressed.
5
Audio-in jack Connects the speaker to a device.
6
Micro USB port Connects the speaker to power. Be
sure to charge the speaker before
rst use.
7
Power light Solid white: The speaker is paired
or connected directly to an audio
device.
Blinking white and amber: The
speaker is pairing.
Blinking amber: The battery is low.
Solid amber: The speaker is
charging.
This product is rated IP-64, which means that it is
protected against dust and splashing water. To maintain
the IP-64 rating, close the I/O door. IP ratings are not a
guarantee of future performance. Coverage for damage
under IP-64 test conditions or any accidental damage
requires the purchase of an optional HP Accidental
Damage Protection Care Pack.
For regulatory and safety notices, refer to the Product
Notices included with your product.
*Cable not included.
Component Description
1
Power button Turns the speaker on or o when
pressed. The speaker automatically
connects to the last device paired
through Bluetooth®. If it cannot
nd that device, it automatically
enters pairing mode. To connect
to a device through Bluetooth, see
device documentation.
2
Volume down
button
Decreases the volume when
pressed.
3
Volume up
button
Increases the volume when
pressed.
4
Call button Answers or ends a call when
pressed. If connected to a device
through Bluetooth, plays or pauses
music when pressed.
5
Audio-in jack Connects the speaker to a device.
6
Micro USB port Connects the speaker to power. Be
sure to charge the speaker before
rst use.
7
Power light Solid white: The speaker is paired
or connected directly to an audio
device.
Blinking white and amber: The
speaker is pairing.
Blinking amber: The battery is low.
Solid amber: The speaker is
charging.
This product is rated IP-64, which means that it is
protected against dust and splashing water. To maintain
the IP-64 rating, close the I/O door. IP ratings are not a
guarantee of future performance. Coverage for damage
under IP-64 test conditions or any accidental damage
requires the purchase of an optional HP Accidental
Damage Protection Care Pack.
For regulatory and safety notices, refer to the Product
Notices included with your product.
*Cable not included.
Component Description
1
Power button Turns the speaker on or o when
pressed. The speaker automatically
connects to the last device paired
through Bluetooth®. If it cannot
nd that device, it automatically
enters pairing mode. To connect
to a device through Bluetooth, see
device documentation.
2
Volume down
button
Decreases the volume when
pressed.
3
Volume up
button
Increases the volume when
pressed.
4
Call button Answers or ends a call when
pressed. If connected to a device
through Bluetooth, plays or pauses
music when pressed.
5
Audio-in jack Connects the speaker to a device.
6
Micro USB port Connects the speaker to power. Be
sure to charge the speaker before
rst use.
7
Power light Solid white: The speaker is paired
or connected directly to an audio
device.
Blinking white and amber: The
speaker is pairing.
Blinking amber: The battery is low.
Solid amber: The speaker is
charging.
This product is rated IP-64, which means that it is
protected against dust and splashing water. To maintain
the IP-64 rating, close the I/O door. IP ratings are not a
guarantee of future performance. Coverage for damage
under IP-64 test conditions or any accidental damage
requires the purchase of an optional HP Accidental
Damage Protection Care Pack.
For regulatory and safety notices, refer to the Product
Notices included with your product.
*Cable not included.
Component Description
1
Power button Turns the speaker on or o when
pressed. The speaker automatically
connects to the last device paired
through Bluetooth®. If it cannot
nd that device, it automatically
enters pairing mode. To connect
to a device through Bluetooth, see
device documentation.
2
Volume down
button
Decreases the volume when
pressed.
3
Volume up
button
Increases the volume when
pressed.
4
Call button Answers or ends a call when
pressed. If connected to a device
through Bluetooth, plays or pauses
music when pressed.
5
Audio-in jack Connects the speaker to a device.
6
Micro USB port Connects the speaker to power. Be
sure to charge the speaker before
rst use.
7
Power light Solid white: The speaker is paired
or connected directly to an audio
device.
Blinking white and amber: The
speaker is pairing.
Blinking amber: The battery is low.
Solid amber: The speaker is
charging.
This product is rated IP-64, which means that it is
protected against dust and splashing water. To maintain
the IP-64 rating, close the I/O door. IP ratings are not a
guarantee of future performance. Coverage for damage
under IP-64 test conditions or any accidental damage
requires the purchase of an optional HP Accidental
Damage Protection Care Pack.
For regulatory and safety notices, refer to the Product
Notices included with your product.
*Cable not included.
Component Description
1
Power button Turns the speaker on or o when
pressed. The speaker automatically
connects to the last device paired
through Bluetooth®. If it cannot
nd that device, it automatically
enters pairing mode. To connect
to a device through Bluetooth, see
device documentation.
2
Volume down
button
Decreases the volume when
pressed.
3
Volume up
button
Increases the volume when
pressed.
4
Call button Answers or ends a call when
pressed. If connected to a device
through Bluetooth, plays or pauses
music when pressed.
5
Audio-in jack Connects the speaker to a device.
6
Micro USB port Connects the speaker to power. Be
sure to charge the speaker before
rst use.
7
Power light Solid white: The speaker is paired
or connected directly to an audio
device.
Blinking white and amber: The
speaker is pairing.
Blinking amber: The battery is low.
Solid amber: The speaker is
charging.
This product is rated IP-64, which means that it is
protected against dust and splashing water. To maintain
the IP-64 rating, close the I/O door. IP ratings are not a
guarantee of future performance. Coverage for damage
under IP-64 test conditions or any accidental damage
requires the purchase of an optional HP Accidental
Damage Protection Care Pack.
For regulatory and safety notices, refer to the Product
Notices included with your product.
*Cable not included.
Component Description
1
Power button Turns the speaker on or o when
pressed. The speaker automatically
connects to the last device paired
through Bluetooth®. If it cannot
nd that device, it automatically
enters pairing mode. To connect
to a device through Bluetooth, see
device documentation.
2
Volume down
button
Decreases the volume when
pressed.
3
Volume up
button
Increases the volume when
pressed.
4
Call button Answers or ends a call when
pressed. If connected to a device
through Bluetooth, plays or pauses
music when pressed.
5
Audio-in jack Connects the speaker to a device.
6
Micro USB port Connects the speaker to power. Be
sure to charge the speaker before
rst use.
7
Power light Solid white: The speaker is paired
or connected directly to an audio
device.
Blinking white and amber: The
speaker is pairing.
Blinking amber: The battery is low.
Solid amber: The speaker is
charging.
This product is rated IP-64, which means that it is
protected against dust and splashing water. To maintain
the IP-64 rating, close the I/O door. IP ratings are not a
guarantee of future performance. Coverage for damage
under IP-64 test conditions or any accidental damage
requires the purchase of an optional HP Accidental
Damage Protection Care Pack.
For regulatory and safety notices, refer to the Product
Notices included with your product.
*Cable not included.
Component Description
1
Power button Turns the speaker on or o when
pressed. The speaker automatically
connects to the last device paired
through Bluetooth®. If it cannot
nd that device, it automatically
enters pairing mode. To connect
to a device through Bluetooth, see
device documentation.
2
Volume down
button
Decreases the volume when
pressed.
3
Volume up
button
Increases the volume when
pressed.
4
Call button Answers or ends a call when
pressed. If connected to a device
through Bluetooth, plays or pauses
music when pressed.
5
Audio-in jack Connects the speaker to a device.
6
Micro USB port Connects the speaker to power. Be
sure to charge the speaker before
rst use.
7
Power light Solid white: The speaker is paired
or connected directly to an audio
device.
Blinking white and amber: The
speaker is pairing.
Blinking amber: The battery is low.
Solid amber: The speaker is
charging.
This product is rated IP-64, which means that it is
protected against dust and splashing water. To maintain
the IP-64 rating, close the I/O door. IP ratings are not a
guarantee of future performance. Coverage for damage
under IP-64 test conditions or any accidental damage
requires the purchase of an optional HP Accidental
Damage Protection Care Pack.
For regulatory and safety notices, refer to the Product
Notices included with your product.
*Cable not included.
Component Description
1
Power button Turns the speaker on or o when
pressed. The speaker automatically
connects to the last device paired
through Bluetooth®. If it cannot
nd that device, it automatically
enters pairing mode. To connect
to a device through Bluetooth, see
device documentation.
2
Volume down
button
Decreases the volume when
pressed.
3
Volume up
button
Increases the volume when
pressed.
4
Call button Answers or ends a call when
pressed. If connected to a device
through Bluetooth, plays or pauses
music when pressed.
5
Audio-in jack Connects the speaker to a device.
6
Micro USB port Connects the speaker to power. Be
sure to charge the speaker before
rst use.
7
Power light Solid white: The speaker is paired
or connected directly to an audio
device.
Blinking white and amber: The
speaker is pairing.
Blinking amber: The battery is low.
Solid amber: The speaker is
charging.
This product is rated IP-64, which means that it is
protected against dust and splashing water. To maintain
the IP-64 rating, close the I/O door. IP ratings are not a
guarantee of future performance. Coverage for damage
under IP-64 test conditions or any accidental damage
requires the purchase of an optional HP Accidental
Damage Protection Care Pack.
For regulatory and safety notices, refer to the Product
Notices included with your product.
*Cable not included.
Component Description
1
Power button Turns the speaker on or o when
pressed. The speaker automatically
connects to the last device paired
through Bluetooth®. If it cannot
nd that device, it automatically
enters pairing mode. To connect
to a device through Bluetooth, see
device documentation.
2
Volume down
button
Decreases the volume when
pressed.
3
Volume up
button
Increases the volume when
pressed.
4
Call button Answers or ends a call when
pressed. If connected to a device
through Bluetooth, plays or pauses
music when pressed.
5
Audio-in jack Connects the speaker to a device.
6
Micro USB port Connects the speaker to power. Be
sure to charge the speaker before
rst use.
7
Power light Solid white: The speaker is paired
or connected directly to an audio
device.
Blinking white and amber: The
speaker is pairing.
Blinking amber: The battery is low.
Solid amber: The speaker is
charging.
This product is rated IP-64, which means that it is
protected against dust and splashing water. To maintain
the IP-64 rating, close the I/O door. IP ratings are not a
guarantee of future performance. Coverage for damage
under IP-64 test conditions or any accidental damage
requires the purchase of an optional HP Accidental
Damage Protection Care Pack.
For regulatory and safety notices, refer to the Product
Notices included with your product.
*Cable not included.
Component Description
1
Power button Turns the speaker on or o when
pressed. The speaker automatically
connects to the last device paired
through Bluetooth®. If it cannot
nd that device, it automatically
enters pairing mode. To connect
to a device through Bluetooth, see
device documentation.
2
Volume down
button
Decreases the volume when
pressed.
3
Volume up
button
Increases the volume when
pressed.
4
Call button Answers or ends a call when
pressed. If connected to a device
through Bluetooth, plays or pauses
music when pressed.
5
Audio-in jack Connects the speaker to a device.
6
Micro USB port Connects the speaker to power. Be
sure to charge the speaker before
rst use.
7
Power light Solid white: The speaker is paired
or connected directly to an audio
device.
Blinking white and amber: The
speaker is pairing.
Blinking amber: The battery is low.
Solid amber: The speaker is
charging.
This product is rated IP-64, which means that it is
protected against dust and splashing water. To maintain
the IP-64 rating, close the I/O door. IP ratings are not a
guarantee of future performance. Coverage for damage
under IP-64 test conditions or any accidental damage
requires the purchase of an optional HP Accidental
Damage Protection Care Pack.
For regulatory and safety notices, refer to the Product
Notices included with your product.
*Cable not included.
Component Description
1
Power button Turns the speaker on or o when
pressed. The speaker automatically
connects to the last device paired
through Bluetooth®. If it cannot
nd that device, it automatically
enters pairing mode. To connect
to a device through Bluetooth, see
device documentation.
2
Volume down
button
Decreases the volume when
pressed.
3
Volume up
button
Increases the volume when
pressed.
4
Call button Answers or ends a call when
pressed. If connected to a device
through Bluetooth, plays or pauses
music when pressed.
5
Audio-in jack Connects the speaker to a device.
6
Micro USB port Connects the speaker to power. Be
sure to charge the speaker before
rst use.
7
Power light Solid white: The speaker is paired
or connected directly to an audio
device.
Blinking white and amber: The
speaker is pairing.
Blinking amber: The battery is low.
Solid amber: The speaker is
charging.
This product is rated IP-64, which means that it is
protected against dust and splashing water. To maintain
the IP-64 rating, close the I/O door. IP ratings are not a
guarantee of future performance. Coverage for damage
under IP-64 test conditions or any accidental damage
requires the purchase of an optional HP Accidental
Damage Protection Care Pack.
For regulatory and safety notices, refer to the Product
Notices included with your product.
*Cable not included.
Component Description
1
Power button Turns the speaker on or o when
pressed. The speaker automatically
connects to the last device paired
through Bluetooth®. If it cannot
nd that device, it automatically
enters pairing mode. To connect
to a device through Bluetooth, see
device documentation.
2
Volume down
button
Decreases the volume when
pressed.
3
Volume up
button
Increases the volume when
pressed.
4
Call button Answers or ends a call when
pressed. If connected to a device
through Bluetooth, plays or pauses
music when pressed.
5
Audio-in jack Connects the speaker to a device.
6
Micro USB port Connects the speaker to power. Be
sure to charge the speaker before
rst use.
7
Power light Solid white: The speaker is paired
or connected directly to an audio
device.
Blinking white and amber: The
speaker is pairing.
Blinking amber: The battery is low.
Solid amber: The speaker is
charging.
This product is rated IP-64, which means that it is
protected against dust and splashing water. To maintain
the IP-64 rating, close the I/O door. IP ratings are not a
guarantee of future performance. Coverage for damage
under IP-64 test conditions or any accidental damage
requires the purchase of an optional HP Accidental
Damage Protection Care Pack.
For regulatory and safety notices, refer to the Product
Notices included with your product.
*Cable not included.
866198-B21
1 2 3 4
6
5
7
EN
AR
ID
BG
CS
DA
DE
ES
EL
FR
HR
IT
KK
LV
LT
HU
NL