Instruction Manual

1. Plug in and fully charge the Remote and the Receiver collar.
2 hours charging time is sufficient for battery to be fully charged.
2. When full charged, the red LED on the Receiver Collar will become green. The
Battery Display of the Remote will stop cycling and appear full.
3. Please replace the rubber cover when the Receiver Collar is full charged.
Tips:
1. Excessive charging will shorten battery life. Only charge them when batteries are low.
2. When you’re not using the collar, please turn it off to increase the battery life.
Note:
Please use the Output: DC 5V 500-1000mA charger to charge the product.
Don’t use a charger that does not meet the specifications to charge the product.
Prepare the Remote
Turn ON/OFF the Remote
1. Press the ON/OFF button to turn the remote ON.
2. LED screen will show the information of current channel, battery power and levels. If
not, please charge the remote.
3. Long press the ON/OFF button to turn the remote OFF.
Prepare the Receiver
Please use our distribution test tool to install the contact points.
You can also choose to use contact spring sheet, which make the contact more effective
and more comfortable.