User's Manual

ManualsBrandsShenzhen Delux Industry ManualsComputers & AccessoriesWIRELESS KEYBOARD

K7016G+M500G+GC11U

RF Keyboard & Optical Mouse User' s Guide

The is work frequency:2.4GHz

Welcome

Your wireless keyboard and mouse combo uses digital radio technology to connect with your

computer. The communication between the keyboard and mouse and your computer is achieved

by using highly precise and reliable radio waves. It does not require in-sight usage as the infra-red

one does, since radio waves can penetrate non-metallic objects as: wood, mirror etc, and it can

radiate signals full 360 degree direction! So you can place your receiver anywhere. By using our

keyboard and mouse combo, you do not have to let bulky cables occupy your table.

Your wireless mouse uses the world,s most advanced optical positioning technology and

the best optical positioning IC (model: ADNS-5030 ), which can not only get more precise

positioning, but also reach to 500CPI double to normal 400CPI IC. So it can meet your

requirement of fast moving of the mouse, and relax your wrist by saving half of your wrist

movement! Meanwhile, inside the mouse, there is a good design for battery re-charging circuit,

and along with it, we give you the Ni-MH batteries and a suited charger for you as a gift, to save

your extra cost for replacing new batteries.

Your wireless keyboard comes with multimedia keys and an internet access key, which is

compatible with Windows ME, Windows 2000,Windows XP. If you are using windows 98, please

unpack the package first, then insert the 1.44M magnetic disk into your computer floppy drive and

install it. The multimedia control function is then installed in your computer, which means you can

access through the internet quickly, too.

The Batteries

The cordless keyboard uses two AA (5#) alkaline batteries, they can be used for more

than six months under proper usage.

The cordless mouse uses two AAA (7#) re-chargeable Ni-MH batteries, they can be used

for more than three years under proper usage.

If not using your keyboard and mouse for a long time, please pick the batteries out and

keep them in shade and dry place.

The batteries along with the combo are sent as a present, not be warrantied.

Do not Use charger not approved by our company, otherwise the mouse and batteries

can be damaged.

The charger of the mouse is only suitable for the AAA (7#) re-chargeable Ni-MH

batteries, please don,t charge other batteries like carbon and alkaline batteries, otherwise it will

cause leakage or broken of the batteries.

If the batteries were found leakage, stain, distortion or any other abnormity, please don,t

use the battery or charge it.

If not be used for more than one year, the Ni-MH batteries may be abate, suggest you

discharge and re-charge it for some times during the time.

Installing Batteries into the Mouse

Step 1. Push the buckle on the bottom of the mouse, with your thumb, as the arrow in the picture,

then pull outside the mouse,s battery cover to open it.

Summary of content (6 pages)

PAGE 1
K7016G+M500G+GC11U RF Keyboard & Optical Mouse User' s Guide The is work frequency:2.4GHz Welcome Your wireless keyboard and mouse combo uses digital radio technology to connect with your computer. The communication between the keyboard and mouse and your computer is achieved by using highly precise and reliable radio waves.
PAGE 2
Step 2. Insert two AAA re-chargeable Ni-MH batteries as shown inside the battery compartment. Step 3. Replace the cover carefullyt . First time using of the AAA (7#) Ni-MH batteries, Please charge it first. Please check if your local voltage is suitable for the charger,s input voltage, otherwise, it will damage the batteries and the charger too.
PAGE 3
We’ve also developed low voltage warning circuit. During using of the keyboard, when the voltage is low, the keyboard will send the low voltage signal to the receiver, then the marked COM red LED will keep flashing, reminding you of low voltage warning signal, until there,s no warning signal from the keyboard. When there,s low voltage signal warning, please replace the batteries in time, we suggest you use same specification batteries, and avoid usage of new and old ones.
PAGE 4
seconds, if succeed in communication, the mouse should be used normally, at the same time the communication indicator LED will light on. If mouse fails to be working normally after 10 seconds, please repeat the previous step again. Remarks: For the 1st step, if the pressing time longer than 3 seconds, the mice will be turned off! Want to start it? Just again press the button once (<2 seconds). Establishing the Communication Channel between the Keyboard and the Receiver 1.
PAGE 5
, Wheel s locking and zooming Function Modification Wheel scrolling Using wheel scroll for precise up and down movement. How to do it Auto scrolling page Place the cursor in an application. ,, Pressing and holding the Ctrl Key on the keyboard, then to zoom in, move the wheel forward; to zoom out, move the wheel backward. ,, Zooming Under certain supporting applications, to realize the zooming function of the file.
PAGE 6
FCC Note: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.