DB12 Instruction I Appearance instruction 1. Machine introduction 2 Charging mode 3 Package list 1. Bracelet x1 2. Packing box x1 3.Instruction manual x1 4, Charging line x1x1 II Initial operating instruction 1. Power on: in the state of power off, long press the bracelet side button for 3 seconds, and the watch vibrates for 1S to start up, showing the main interface 2.
Sleep Exercise mode Exercise mode date Exit exercise mode Note：1. Turn off the interface of mobile phone, countdown and stopwatch by default. If necessary, it can be turned on in the APP setting --- switch setting. 2. Lock the exercise mode, and long press the power button to unlock it 1. Softear download A:For IOS, users will search and download “H Band” in Apple store B: For android, users will go to Google Play, app treasure, pea pod and other apps to search and download "H Band".
A. on/off In the state of power off, long press the side button of the bracelet for 3 seconds, and the watch vibrates for 1S to start up, showing the main interface. B. exercise monitoring Slide interface left and right, can switch to step counting, heart rate, blood pressure, sleep interface. After 3 seconds of no operation, it will shut down automatically. C.
Switch to the manual blood pressure test interface and the device will automatically start the test. The time required to determine the result depends on the user's physical condition. It takes a long time for the results to be measured as normal. Please be patient. During the test, the numerical value is -- --/--. If the blood pressure cannot be measured, it is XXX /xx, please check whether the device sensor is fully attached to the skin and whether the test posture is correct.
G Search mobile phone Keep the "H Band" running in the background of the phone. The device switches to the interface of searching the phone. Click the touch screen and the phone responds. Be careful to keep your phone in ring mode. H stopwatch When the stopwatch switch is turned on at the APP terminal, there will be a stopwatch interface at the device terminal, which will switch to the stopwatch interface.
Alarm setting interface Alarm editing interface K. information alert/push When there is new information, the device will vibrate the reminder and display the message content: the corresponding message displays the corresponding icon (note: please open the reminder switch in the APP first). L. call reminder When calling, the device will continuously vibrate to remind, and you can click the hang up button on the interface to hang up the phone. Click the mute button on the interface and the phone is silent.
phone, or click the camera button to take photos. P. waterproof This product is waterproof grade IP68. It can be worn when washing hands, raining, showering, swimming, bathing. Q. Physiological reminder This function can timely push warm reminders according to users' information of different physiological periods. IV Matters needing attention 1. The adapter with charging voltage >5V and charging current >2A is prohibited. The charging time is 90 minutes: 2. Do not charge in case of water stain; 3.
Body weight： 38g Data transmission： Bluetooth 4.0 Battery type： polymer lithium battery Battery capacity： 220mAh Charging voltage： 5V 100mA Charging current： Working temperature： -5~45°C Waterproof： IP68 Device requirement：Android4.4 or above，Bluetooth 4.0；iphone4s or above，ios8.0 above。 FCC WARNING STATEMENT Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
