Instruction Manual

Switch to the manual blood pressure test interface and the device will automatically start the test.
The time required to determine the result depends on the user's physical condition. It takes a
long time for the results to be measured as normal. Please be patient.
During the test, the numerical value is -- --/--. If the blood pressure cannot be measured, it is XXX
/xx, please check whether the device sensor is fully attached to the skin and whether the test
posture is correct. Please keep your body relaxed and still during the test. Whether or not the
result is detected, the device shuts down automatically after a maximum of 70 seconds. The
blood pressure measured on the device will not be saved.
You can press and enter the manual blood pressure test interface at the bottom of the
data panel of the APP. You can choose to test blood pressure in general mode or private mode.
Blood pressure test results operated on the APP can be saved or not saved.
Open the automatic blood pressure monitoring switch on the APP terminal, and the device will
automatically test blood pressure every 10 minutes every day. The blood pressure value
automatically measured by the device can be viewed in the blood pressure detail interface of the
APP.
Open the blood pressure private mode switch on the APP terminal. After dynamic calibration of
the device, the blood pressure value measured by professional medical instruments can be input
to obtain the tested data after calibration (note: users with known hypertension should input the
blood pressure value before taking blood pressure medication). To ensure that the test is
effective, make sure that the data entered is your true blood pressure. Please turn off the private
mode after setting the blood pressure private mode before measuring for others.
Manual test mode Blood pressure data panel