Product Description

60 mm
折痕 不印刷
80 mm
说明书尺寸：80x60mm
材质：128G铜版纸
折页
BT03
True Wireless Earbuds with
Bluetooth Speaker
1. Product Description
2. Technical parameters
3. Function description
Bluetooth name of earbuds: E6
Bluetooth name of speaker: BT03
Working current: 100mA
Bluetooth version: V5.3
Effective distance: 10 meters
Key type: Keypress
Speaker specifications: 4Ω 2W
Rechargeable battery specification: 3.7V 300mAH
Earbuds battery specification: 3.7V 30mAH
Audio range: 20-20Khz
Speaker playing time: 2-3 hours
Quiescent current: 5UA
SNR: >85db
Charging port: Type-C
Low voltage reminder: Yes
Recharging current: 5V 200mA
This product is an in-ear TWS Bluetooth Earbuds + integrated
hanging buckle combination speaker, compact and lightweight
ergonomic design, built-in low-power high-performance Bluetooth
version 5.3 chip and integrated Bluetooth hanging buckle speaker
charging compartment.
It can adapt to various modes of listening scenes such as sharing
and private.
The compact body supports the luggage buckle lock, which can be
carried with you regardless of outdoor climbing or hiking.
Tips:
1. Put the earbuds back into the charging case before use, and when take
out the earbuds again, “L” and “R” earbuds will start pairing automatically.
Or press the touch buttons of the “L” and “R” earbuds for 3 seconds,
earbuds will automatically pair after power on.
2.Turn on the Bluetooth of the mobile phone after “L” and “R” earbuds
pairing successfully.
Brief Introduction of TWS Earbuds Function:
1. When the binaural earbuds are taken out of the charging case,
they will automatically complete the pairing with a prompt sound.
2. Then it can be searched and connected by the mobile phone.
3. After the connection is completed, there will be a success tone in
both ears.
4. At this time, it can be realized through the earbuds touch button:
4.1 Click to pause or play music.
4.2 Double-click on the left ear to the previous song, and
double-click on the right ear to the next song.
5. Click to answer the call when there is an incoming call, and click
to end the call when in a call.
6. When put the earbuds back into the charging case, automatically
sleep and start charging, the charging light turn to red and will turn
off after fully charged.
Long press the power button, the speaker can be searched for
connection after power on, and it will automatically power off after 5
minutes without connection.
Brief Introduction of speaker function:
Support protocol: A2DP/HFP/HSP/AVRCP
Standby time: 24H
Touch button
Type-c
charging port
Bluetooth
speaker switch
Bluetooth speaker
Bluetooth speaker side
Earbuds
Function category Function name
Power on
Power off
Phone connecting
Earbuds voice assistant
Clear pairing
Basic functions
Answer call
Hang up call
Refuse call
Music pause
Keep playing music
Next track
Up track
Earbuds pairing
Restore connection
Reconnect after dropped
Earbud power display
Low battery reminder
Automatic charging
Red and blue flash
alternately slowly
Press left or right MFB button once
Double click right MFB button
Operating
Be automatically turn on when take it out of charging box or long press the touch button for 3 seconds
Be automatically turn off when put into charging box or long press the touch button for 3 seconds
The earbuds can be searched after turning on, no need to operate to enter the pairing mode
After connecting the mobile phone, 3-click the left or right earbud function key to wake up the voice assistant
In the state of power on but not connect, 5-click the touch button to start
Short press the MFB button
Earbud indicator
light description
Earbuds blue light flashes
slowly for 5 seconds
Earbuds have been paired successfully but not connected to mobile phones and other
devices
Successfully connected to mobile phones and other devices
Red light is always on The earbud's battery is not full and is in charging (only appears during charging)
The earbuds is powered on but not paired successfully
Earbuds blue light flashes
for 1 second
Telephone
functions
Media functions
Automatic
functions
Other functions
When the voice prompt "battery low" appears during use, it means the battery is too low and needs to be charged
When the earbuds is placed in the charging case, it will automatically recharge, and automatically sleep
when fully charged
Double click left MFB button
After the two earbuds are turned on, they automatically adapt to pairing with each other.
No action required.
When the headset is turned on, the last connected device is selected first, and it will
automatically open after no connection and can be searched and reconnected
After being dropped out of range, return to range within 3 minutes, and the connection
can be automatically restored
After connecting the mobile phone, you can see the power display of the left earphone
on the mobile phone (some mobile phones need to slide down the menu bar to see it)
Short press the MFB button
Long press the left or right MFB button for 2 seconds
When the music is playing, press left or right MFB button once
When it appears that it cannot be turned on or automatically shuts down during useLow power automatic shutdown
137mm
22mm
47mm
Hang Buckle
Clamshell
Bluetooth Earbuds Side
4. Safety Instructions
To prevent dangerous situations during use, please read the
safety instructions.
1. Please do not place the product near heaters, microwave ovens, rice
cookers, pressure cookers and other heating equipments to prevent the
product from overeating and causing a fire.
2. Please do not drop or hit the product to avoid explosion.
3. When used by children, please ensure normal operation under adult
supervision.
4. Do not use in a low temperature and humid environment, the normal
use environment is 0-50℃.
5. Do not disassemble or repair the product without authorization.
6. Do not place the product within 20cm of medical equipment to
prevent equipment interference.
7. When not in use, please unplug the product charger from the socket
to avoid consuming the battery life or causing damage.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the r eceiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party
responsible for compliance could
void the user's authority to operate the equipment.