User's Manual

power saving mode is enabled, the watch will turn off the bt, reduce the brightness
to the lowest, turn off the raise to wake, turn off the automatic detection of heart
rate, vibration motor and other functions
2.The watch charging need to use 5V power adapter and it is required to be 5V
500MA or 5V 1A. When the magnetic charging cable is aligned with the charging part
of the watch, the watch will automatically attract the charging plug. When charging,
the watch will be prompted by the charging interface, and the charging icon will be
stationary after being fully charged.
3.because the charging plug is magnetic, it’s easy to absorb other conductive metal
objects, please timely close the power adapter after the completion of charging, pay
attention to the magnetic plug and do not touch other metal objects or be adsorbed
on the metal objects, so as to avoid short circuit.
Functions Manual
Call function: This function needs to connect the audio Bluetooth, enter the dialing,
you can dial the phone number according to the need; Long press 7 and 9 for two
seconds on the keypad to enter * and #.
Common contacts: You need to set and add them in the common contacts bar of the
APP. The common contacts you set will be automatically synchronized to the watch.
A maximum of 10 contacts can be added.
Call History: This function can save the latest 10 call records.
Voice Assistant: This function requires an audio Bluetooth connection, and can evoke
the phone's Siri voice assistant by tapping the voice ball.
Data: Display the data of steps, distance and calories. You can set the target number
of steps, distance and calories in the APP.
Sports: including running, walking, badminton, tennis, basketball, table tennis,
cycling, yoga, rope skipping, mountain climbing, indoor running, elliptical machine,
rowing machine, lazy bike, exercise bike, baseball, rugby, cricket, strength training,
etc.
Sports record: It saves your latest 10 history records, and you can view the exercise
time, heart rate, calories and other data during exercise.
Heart rate: When entering the interface of heart rate measurement, the green light
at the bottom will start to measure. When the measurement is completed in about
40 seconds, there will be a vibration reminder. If the prompt is "not wearing the
watch", you need to wear the watch again. Note that the data obtained in this
interface is only displayed in real time, and the results will not be saved to the APP
side. The data recorded at the APP comes from the monitoring results obtained after
the automatic monitoring function is enabled.
Sleep: Display the sleep monitoring status of the day, and the data is updated every
day. When connected to the APP, the data can be saved synchronously. The sleep
monitoring time is from 9:30 PM of the day to 12:00 AM of the next day.