User's Manual

Blood oxygen: When entering the blood oxygen measurement interface, the red light
at the bottom will start measuring and there will be a vibration reminder when the
measurement is completed in about 40 seconds.
Weather: After the watch is connected to the APP, the weather interface will display
the weather temperature and weather type
Female health: When registering on the APP for the first time, a female health
function will be added to the APP after the gender is set as female. After setting the
parameters according to the actual situation, the watch will budget the relevant
information of female menstruation, pregnancy preparation, pregnancy period and
so on.
Music: After connecting the APP, you can control the playing of music in the mobile
phone.
Breathing exercises: In breathing exercises, there is a choice between 1 minute and 2
minutes. The user taps the corresponding time for breathing training. After clicking
Start, follow the icon in the breathing exercise,zoom in and inhale, zoom out and
exhale
Stopwatch: Click the start button to calculate, click the pause button to stop, click
another button to reset. During the timing process, click the clock icon on the right to
mark the time, and a maximum of 99 pieces of data can be marked.
Timer: The system preset the common time duration. You can click the
corresponding time duration to time quickly or click the custom button to set the
time. Click the Start button to start the timing, click the pause button to pause the
timing, click the reset button to reset the timing to zero.
Alarm clock: After connecting the watch to the APP, you can set a single alarm clock,
a cycle alarm clock, and up to 5 alarm clocks.
Always-on clock: After this function is enabled, the time will be displayed on the
screen-off , and the watch will increase the power consumption. Please use it
according to your own needs.
Q&A
1. Sleep data is not accurate enough
A. Sleep monitoring simulates people's natural sleep and wake up time, so it needs to
be worn normally
B. If you wear it too late or when you fall asleep, errors may occur
C. sleep data is not monitored during the daytime, the default sleep monitoring
period is 9-30 p.m. to 12-00 a.m. the next day
2. BT is not connected or cannot be connected
A. Restart the watch and reconnect
B. Please try to restart the mobile phone BT and connect again
C. Do not connect the mobile phone to other BT devices at the same time. Try to
connect the mobile phone again after untying other devices.