CT3 2 0 B Label Printer Quick Installation Guide
1 NPACKING CHECKLIST Printer Installation Data cable Installation Guide
2 APPEARANCE COMPONENT Front view Cutter Reset button USB connector Lanyard hole position Open the top cover Display Rubber roller Printhead Power / Menu Confirmation/ Paper advance button Fixer Top cover opening button Upward Downward
3 KEY DESCRIPTION （1）Press and hold the power button for 2 seconds to turn the printer on. （2）When the power is on, press and hold the power button for 2 seconds to turn the printer off. （3）In standby mode, click the power button to enter the setup menu. （4）When entering the setup menu, press the power button to return to the previous level page. （1）Label sheet: Click OK to walk away from a label sheet to position and adjust it to the start of the next label.
4 PAPER ROLL LOADING 1、Press the top cover open button downward to open the top cover. 2、Install the paper roll as shown in the figure below. ①Open the top cover, move the jammer lock switch forward to OPEN, and insert the paper roll as shown.
②Push the retainer to the left until it snaps the paper roll properly and then push the locking switch back to lock it. ③Pull out part of the paper roll and close the top cover, making sure that both sides of the top cover are closed.
5 SCREEN INFORMATION ①Bluetooth Indication ③Battery ②External Power Power Indication Indication CT320B-XXXX Icon area Text Area Icon area description ①Bluetooth Indication When Bluetooth is not paired, the icon blinks, after Bluetooth is paired the icon is always on. ②External Power Supply Indication Always on when the USB port is connected to the power supply, and the icon disappears when the power is disconnected. ③Battery Level Indication The battery icon indicates a full charge at 4 cells.
Text Area Description 1、Screen Settings Function items Options Parameters Print speed Low speed, medium speed, high speed Off-line Printing Print Density Paper Type Print command Advanced Settings Print Direction Memory Printing Auto shutdown Horizontal Offset Vertical Offset Prompt tone Display Language Restore factory settings Manufacturer Equipment Model Serial number Other Information Hardware Version Firmware Version Bluetooth Name Display the templates stored in the printer, up to 10 templa
2、Screen Tips Tip content Excessive temperature Pause printing Top cover not closed Lack of paper Factory settings have been restored. Printing in progress Print completion Status Print head temperature is too high, please wait. Pause in printing, please press the confirmation button to continue printing The printer top cover is not closed in place, please close the cover. The printer paper bin is out of paper, please install the paper roll.
6 OFTWARE DOWNLOAD iOS / Android Scan the QR code below with a mobile phone to download“YunPrint”. Please operate the software follwing the software guidance. YunPrint Download label editing app "YunPrint" from Google Play Store or Apple APP Store and install it. Windows Visit website: https://yunprint.dlabel.cn/pc to download“YunPrint”and driver.
7 NOTES Usage precautions (1) Install the printer on a stable surface. Do not place the printer in areas exposed to vibration or impact. (2) Do not use or store the printer in areas exposed to high temperatures, high humidity, or excessive dust. (3) Connect the power adapter to an appropriate grounding outlet. Avoid using the same outlet with large motors or other devices that may cause power supply voltage fluctuations. (4) No water or conductive substance (i.e., metal) is allowed into the printer.
Printer cleaning The printhead should be cleaned promptly if: (1) The print is not clear; (2) The vertical column of print is not clear; (3) A Grinding noise is heard while feeding the paper; Cleaning Steps: (1) Switch the printer power off, open the cover and remove any paper; (2) Allow the printhead to cool if it had just finished printing; (3) Using a soft cotton cloth dipped in absolute ethyl alcohol, gently wipe the dust and particles off the thermal printhead surface; (4) Only use the printer for p
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority tooperate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
