Quick Installation Guide

NOTES
7
Usage precautions
(1) Install the printer on a stable surface. Do not place the printer in areas exposed to
vibration or impact.
(2) Do not use or store the printer in areas exposed to high temperatures, high
humidity, or excessive dust.
(3) Connect the power adapter to an appropriate grounding outlet. Avoid using the
same outlet with large motors or other devices that may cause power supply voltage
fluctuations.
(4) No water or conductive substance (i.e., metal) is allowed into the printer. In case of
such a condition, turn off the power immediately.
(5) Do not allow the printer to start printing when there is no recording paper
installed, otherwise the printhead and rubber roller will be damaged.
(6) Disconnect the DC adapter when the printer is not used for a long time.
(7) Users shall not disassemble the printer for maintenance or modification.
(8) Use only the power adapter that comes with the printer.
(9) To ensure print quality and normal lifetime, use recommended or good quality
paper.
(10) Shut down the printer when connecting or disconnecting interface connectors.
(11) As the power disconnecting device, the power plug of the adapter should be
installed near the equipment and easy to access.
(12) This product is intended to be used at altitudes not exceeding 5,000 m in tropical
climates.