Quick Installation Guide

KEY DESCRIPTION
3
（1）Press and hold the power button for 2 seconds to turn the
printer on.
（2）When the power is on, press and hold the power button for
2 seconds to turn the printer off.
（3）In standby mode, click the power button to enter the setup menu.
（4）When entering the setup menu, press the power button to return
to the previous level page.
Press and hold the Power button and OK button at the
same time to print the self-test page.
（1）Label sheet: Click OK to walk away from a label sheet to position
and adjust it to the start of the next label.
（2）Continuous paper: click OK to go 10mm, long press to keep going,
release the button to stop going.
（3）When you enter the Setup menu, click OK to confirm your selection.
When entering the Setup menu click the Down button to go down
and select the Setup item.
（1）When entering the Setup menu click the Up button to go up
and select a setting item.
（2）Increase the number of prints upwards when entering the offline
print confirmation template.