User's Manual

- 3 -
WARNINGS!
 Batteries must be installed or replaced by an adult.
 The use of good quality alkaline batteries is recommended.
 Place batteries based on the polarity shown on the battery compartment.
 Only use the recommended type of batteries.
 Non rechargeable batteries are not to be recharged
 Rechargeable batteries are only to be charged under adult supervision
 Rechargeable batteries are to be removed before being charged.
 DO NOT mix different types of batteries together.
 DO NOT mix new and old batteries together.
 If you do not use the product for an extended period of time, we recommend that you take
out the batteries. Remove exhausted batteries from the product. Battery leak may
cause damage.
 DO NOT short circuit the terminals of the battery.
 DO NOT throw batteries into an open flame. They may explode.
 Keep the packaging for future reference as it contains important information
Installing of the USB Receiver (Compatible with OS: Windows 2000/XP/Vista/7 and Mac OS X
10.5 – 10.6)
1. Remove the Battery Compartment Cover and carefully slide out the USB Receiver from its
designated compartment adjacent to the battery compartment.
2. Insert the USB Receiver of the Optical Mouse directly into a USB port (USB 1.1-3.0) of your
computer running on either Windows or Mac OS.
3. Your USB Receiver will be automatically installed by the plug and play function of the Windows or
Mac OS.
Note: There is no need to remove the USB Receiver from the USB port of your computer even after
turning off unless you need to free up the USB port for other device.
OPERATING INSTRUCTIONS
Left Button
Use this button to select an item from a pop up or pull down menu or to click a function button.
Right Button
Use this button to access the quick menu of a related function.
Scroll Wheel with Button (Middle Button)
1. Under normal operation, rotate the Scroll Wheel for fast browsing up/down in an internet browser and
in other document files.
2. For Windows users only: To enable smooth auto scrolling, press the Scroll Wheel Button. A double
arrow icon, showing the anchor point, and a
floating arrow icon, showing the current mouse
position, will appear. To scroll up/down, move
the mouse until the floating arrow icon becomes
an up/down arrow. The farther away the floating
arrow is from the anchor point, the faster the
scrolling speed. Press the Middle Button again
to exit the auto scroll function when you have
finished.
Sleep Mode
When the mouse is left idle for 8 minutes, it will enter sleep mode for battery power saving. Press the
Left, Right or Scroll Wheel Button to wake up the Mouse and resume normal operation.
Manual Pairing
This product features auto ID pairing function. The USB Receiver and the wireless mouse will pair
automatically once they are activated. Should there be any problem in auto ID pairing, please follow the
steps below to complete pairing manually.
For manual pairing, make sure that the Mouse is no further than 3 feet (1m) away from the USB
Receiver.
1. Unplug the USB Receiver from the USB port and then reinsert after 2 seconds.